Climate Control Lighting Mod

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

YukonBrosef12

Member
Joined
Jul 22, 2013
Posts
35
Reaction score
0
Location
Louisiana
I have rendered all interior lighting in my 02 kon to white dome led and blue everything else. I am now taking on the challenge of swapping each of the climate control modules from regular backlight to blue led! I don't want to mess up on this so before I try to tackle this I would like some help! Does anyone know how to do this or have any idea how to go about this? Any help is appreciated! :think:
 

nuc_meltdown

Member
Joined
Nov 30, 2013
Posts
40
Reaction score
0
Location
NW Alabama
Just did this yesterday (on my 03) with the help from a friend who has skills in this stuff. lol . I assume you have skills to work on circuit boards and soldering on them, so....remove the unit from the dash. It has two bolts and then 4 clips. unplug the harnesses(2) and then the box has a total of 4 screws (3mm i think) that you remove to get to the circuit board. Remove the lights and solder in your resistors and LEDs. replace. The only thing that wont change color is the actual display. Gonna do the stock radio when i get time.
 
Last edited:

nuc_meltdown

Member
Joined
Nov 30, 2013
Posts
40
Reaction score
0
Location
NW Alabama
These are the only two pics that were taken.
 

Attachments

  • IMG_20140217_171825_429.jpg
    IMG_20140217_171825_429.jpg
    90.2 KB · Views: 46
  • IMG_20140217_171835_280.jpg
    IMG_20140217_171835_280.jpg
    89.3 KB · Views: 43
OP
OP
YukonBrosef12

YukonBrosef12

Member
Joined
Jul 22, 2013
Posts
35
Reaction score
0
Location
Louisiana
Resistor

Just did this yesterday (on my 03) with the help from a friend who has skills in this stuff. lol . I assume you have skills to work on circuit boards and soldering on them, so....remove the unit from the dash. It has two bolts and then 4 clips. unplug the harnesses(2) and then the box has a total of 4 screws (3mm i think) that you remove to get to the circuit board. Remove the lights and solder in your resistors and LEDs. replace. The only thing that wont change color is the actual display. Gonna do the stock radio when i get time.
Hey man thanks! Do you know resistor size?
 

nuc_meltdown

Member
Joined
Nov 30, 2013
Posts
40
Reaction score
0
Location
NW Alabama
Thanks. Hopefully we'll do the radio soon and maybe tackle all the door switches.
 
Last edited:

Forum statistics

Threads
132,038
Posts
1,861,383
Members
96,486
Latest member
enginerd3
Top