Color matched Bowtie and Center caps w/o paint :)
- Thread starter bkboatnsleds
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sweet_N_Low
Full Access Member
- Joined
- Mar 11, 2011
- Posts
- 373
- Reaction score
- 0
When I did my dash, I purchased from ebay
OP
OP
bkboatnsleds
Full Access Member
I got mine from a sign shop.. The guy who does all my vehicle lettering, and biz lettering. I'd think any place who cuts letters or does wraps would have it. My guy just gave me a sheet of it.
It's easy to work with - I just removed the backing as I laid it on there and worked it down using a rag to push out any air bubbles.. Once the sheet was over the entire area I simply used an exacto knife and ran it around the inside. Then used a flat blade screwdriver to push it down around the edges between the bowtie and the grill..
It's easy to work with - I just removed the backing as I laid it on there and worked it down using a rag to push out any air bubbles.. Once the sheet was over the entire area I simply used an exacto knife and ran it around the inside. Then used a flat blade screwdriver to push it down around the edges between the bowtie and the grill..
- Joined
- Jan 3, 2011
- Posts
- 50,411
- Reaction score
- 17,416
Oh....so you didn't even have to take the bowtie off to wrap it?
OP
OP
bkboatnsleds
Full Access Member
Nope! Took 5 min literally..
put on 1 piece - larger than the tie... and used the little gap between the tie and the grill as a "guide" for my knife.. worked awesome.
I think for 07 up body style it would be different b/c its not flush with the grill... But have not tried it yet.
- Joined
- Jan 3, 2011
- Posts
- 50,411
- Reaction score
- 17,416
Awesome! 
ideas are abounding in my head with these ideas and this info 
ideas are abounding in my head with these ideas and this info Similar threads
