Crazycrew's new to the family ride/build thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
C

crazycrew

Full Access Member
Joined
Mar 11, 2010
Posts
1,354
Reaction score
956
Location
Vacherie, LA
My djm sway bar endlinks showed up Tuesday. I installed them today. Talk about a pain in the dick hole with no help. Hopefully it makes that big ***** sway a little less.

Also removed the 1" spacer, and swapped my 24s from my truck onto the yukon.

I need to get some machine bolts so I can shorten the links more. The ones that come with the kit are definitely not short enough for the spring alone on the lwb.

I have them all the way screwed down and still need at least another 3/8 shorter on the links. I'll go to. Lowe's tomorrow and get some machine bolts to make my own.

Sent from my SM-G955U using Tapatalk
 
OP
OP
C

crazycrew

Full Access Member
Joined
Mar 11, 2010
Posts
1,354
Reaction score
956
Location
Vacherie, LA
So, I dicked with the endlinks today. Cut 1/8th off each side of the links and screwed the caps back on for a total length of 2-11/16". That's from center to center of the endlink caps. Probably could've done 2-3/4" cause the rear is about 1/8" lower, but it'll stay that way.

41ff0732cc5e054613b4694a1e6eac9e.jpg


Sent from my SM-G955U using Tapatalk
 
OP
OP
C

crazycrew

Full Access Member
Joined
Mar 11, 2010
Posts
1,354
Reaction score
956
Location
Vacherie, LA
[emoji2961][emoji2961][emoji2961][emoji2961][emoji2961]

Sent from my SM-G955U using Tapatalk
 

Forum statistics

Threads
132,376
Posts
1,867,002
Members
97,012
Latest member
Roscoe2352

Latest posts

Top