Custom Interior storage

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

timjohnson22

Full Access Member
Joined
May 15, 2010
Posts
375
Reaction score
10
Location
GEORGIA
Does anyone know were I can fabricate a storage area to hold Amps, tools ect? I am talking about under the carpet hidden. Like a custom metal area were you can only see it from underneath the body. About 4" deep and 3 ft width. Thanks in advanced!
 

shundal

Full Access Member
Joined
Sep 3, 2010
Posts
809
Reaction score
25
Location
NorCal
Maybe if you removed the spare tire, sealed the bottom up, and made a cutout from the trunk floor into the top? or possible cutting and molding a compartment into the rear lower quarter panel trim? There is room to mount amps under the second row if you have a bench seat, it might be a little shallow but it might be an option too.
 
OP
OP
timjohnson22

timjohnson22

Full Access Member
Joined
May 15, 2010
Posts
375
Reaction score
10
Location
GEORGIA
I am going to mount the amps on the rear lift gate. I am going to start the install this weekend. Thanks!
 

shundal

Full Access Member
Joined
Sep 3, 2010
Posts
809
Reaction score
25
Location
NorCal
sounds great, can't wait to see some pics, haven't seen anyone mount them like that before
 
OP
OP
timjohnson22

timjohnson22

Full Access Member
Joined
May 15, 2010
Posts
375
Reaction score
10
Location
GEORGIA
Weekend interior overhaul

Ok, the work started this weekend. 1 I am going to reinstall all of my wires under the carpet. 2. New custom subwoofer box between the second row seats with a kicker square sub. 3. Cut and mount my two amps to my back lift gate and the Rockeford Fostgate 3sixty. 4 install Infinity Kappa seri 3 1/2 in the reat piller. 5 install 2 sets of Kicker 08KS650.2 6-1/2" 2-Way 150W Component Speaker System for the front and second row. 6 Install the AVS441 Digital Video Processor with 4 Inputs, 4 Outputs Video Switcher and Amplifier so the headrest channels can be changed from head unit, first DVD headrest with DVD player, second DVD headrest and X-Box 360. I am going to install the AVS441 Digital Video Processor with 4 Inputs, 4 Outputs Video Switcher and Amplifier behind the second row seat on the drivers side flush with the plastic molding were the tire jack is, so the buttons can be manually pushed in the remote goes out. I will post pictures of the install. After Christmas I am going to mount the X-Box 360 in the interior roof. Oh, I am not doing this my self my boy Cortez from the Install Shop is the main installer. I will post pictures of everything.
 
Last edited:

Forum statistics

Threads
132,462
Posts
1,868,673
Members
97,170
Latest member
yuneek20

Latest posts

Top