Denali Cluster with Heads Up Display

[cmatt]

Installed a Yukon Denali cluster and HUD unit in my 2015.5 Yukon SLT this weekend. The cluster had to be programmed to my vehicle and to enable HUD functionality. I created a custom wiring harness as the only way to add those connections is through swapping the I/P harness. The rest was just swapping parts.










Sent from my iPad using Tapatalk

 

[chicagofan00]

Nice work!

 

[toi]

and now you see all the letters reflected double on your windshield because the units with hud come with different windhields...

 

[MechEng813]

Nice work, lots of effort to get that in there.

I had a factory HUD in my Grand Prix and now my Yukon, but used a cheap OBD connected HUD in my Avalanche to get the speedo.

If the double image start to get to you, try one of these as a quick cheap solution.
Way cheaper than a new windshield and it really wasn't that horrible.

 

[cmatt]

Thanks for the suggestion. I'll give it a try.

 

[tomsquad418]

Installed a Yukon Denali cluster and HUD unit in my 2015.5 Yukon SLT this weekend. The cluster had to be programmed to my vehicle and to enable HUD functionality. I created a custom wiring harness as the only way to add those connections is through swapping the I/P harness. The rest was just swapping parts.










Sent from my iPad using Tapatalk

Would it be possible to do this in my 2015 Tahoe ltz? Can a custom wiring harness be made??

 

[Qlassic418]

Can i replace the cluster only
I like the one from the denali and i found one with the same mileage for $150

 

[cardude2000]

Impressive. Is it blurry IRL?

 

[Page1]

@cmatt - Very Nice Work Sir! Glad to hear it was just swapping parts.

 

[tomsquad418]

Installed a Yukon Denali cluster and HUD unit in my 2015.5 Yukon SLT this weekend. The cluster had to be programmed to my vehicle and to enable HUD functionality. I created a custom wiring harness as the only way to add those connections is through swapping the I/P harness. The rest was just swapping parts.










Sent from my iPad using Tapatalk

In looking to do this on my Tahoe would you be able to create a custom wiring harness? How involved was it? Something I'd be able to do or a local shop or you for some extra bones? Been dying to add hud and swap the cluster out!