Dome and Map lights

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Donnie Yukonie

Yates Caretaker
Supporting Member
Joined
Jul 31, 2011
Posts
5,125
Reaction score
161
try swapping out the fuses just to be sure or make sure they have good contact points I.E no rust or corrosion
 

stereodesigner

Full Access Member
Joined
May 1, 2012
Posts
126
Reaction score
0
If you've checked all that you may have to follow the wires from the killswitch/fuse box maybe a wire got cut somewhere on accident

Sent from my DROID X2 using Tapatalk 2
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
there are as many as four ground locations at play here. but they all go thru one point. that point also carries ground from other systems in the cab like radio, a/c controls, Airbags, instrument lighting, instrument readings among some other things. if it is just the lights i would check the splice S242 "I/P harness, approx. 8 cm from headlamp dimmer switch breakout toward i/p cluster" it will be an orange wire breaking out into 4-5 more orange wires. any of those wires should constantly have voltage on them.
 
OP
OP
Symba_The_Lyon

Symba_The_Lyon

Full Access Member
Joined
Oct 12, 2012
Posts
138
Reaction score
1
I just replaced the fuses still dos not work but i just found out there is no power going to them i just took the ceiling organizer off and there are one pair of black and orange wire starting at the front map light's an d it ends before the first dome light and the two dome light's branch off in to the wiring harness, what would be the first few steps i should take to fine out why there in no power?
 
Last edited:

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
you need to find out why the is no power available where the fuse goes. until you get power at the fuse connections the rest is irreverent at this point.
 
OP
OP
Symba_The_Lyon

Symba_The_Lyon

Full Access Member
Joined
Oct 12, 2012
Posts
138
Reaction score
1
There is power at the curtsy fuse #3 I just blew it trying to run a wire from the mirror light in the visor what im not under standing is i have power to the mirror in the visor, in the doors, and also the curtsy light in the floor board which all run of the same fuse so that means that i should have power in the wires in the ceiling, lol So i guess what im asking now is how to get power back in these lines :lol2:
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
you will wont to look at that splice i told you about earlier. also check for a dirty or disconnected wire connector at the convenience center it feed the roof.
 
OP
OP
Symba_The_Lyon

Symba_The_Lyon

Full Access Member
Joined
Oct 12, 2012
Posts
138
Reaction score
1
I have a update for you guys i have all the light working in the cab :signs1:
 
Top