door lock questions

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tbruz

Full Access Member
Joined
Feb 1, 2011
Posts
548
Reaction score
57
Location
Windham NH
Door locks on a 1997 two door stopped working from inside the truck.
Not working from drivers side, passenger side or from rear barn doors; there is no sound at all when activating these door lock buttons.

If I lock or unlock from the key fob remote; everything works fine, all doors lock and unlock properly.

Because of this I assume the fuse is good and the actuators are just not getting power from the door switches
Any ideas; trouble shooting tips or schematics appreciated.
Thanks
Tbruz
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
switches also activate the relay that fob would so try fuse 13 it provides power to switches when key-less entry is installed.
 
OP
OP
T

Tbruz

Full Access Member
Joined
Feb 1, 2011
Posts
548
Reaction score
57
Location
Windham NH
Fuse 13

OK fuse 13(25A) is blown; what else fuctions off of that fuse?
Thanks
Tbruz
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
188
Location
unknown at this time.
If installed cigar lighter, pwr lumbar seat, Power amplifier, Rear lift glass and door lock system partially.
 
Last edited:
OP
OP
T

Tbruz

Full Access Member
Joined
Feb 1, 2011
Posts
548
Reaction score
57
Location
Windham NH
Fixed!

Thanks for the leads!
Lumbar wire on drivers side was messed up and grounding out to seat frame.
A few wraps of black tape around the wire and fuse 13 doesn't blow anymore.
Tony
 

Forum statistics

Threads
132,655
Posts
1,872,205
Members
97,456
Latest member
kainerbk
Top