stanleyprincely
TYF Newbie
- Joined
- Sep 30, 2024
- Posts
- 1
- Reaction score
- 0
I have a 2010 model Tahoe, in the dashboard always showing all 5 doors are open, could someone help what's the reason?
Door open sign is always shown in dashboard.
- Thread starter stanleyprincely
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Joseph Garcia
Supporting Member
- Joined
- Aug 2, 2018
- Posts
- 7,178
- Reaction score
- 9,644
Welcome to the Forum from NH.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Pics of the truck, please.
I cannot personally assist you with your issue, but other members of this Forum much more knowledgeable than me in this area will chime in.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Pics of the truck, please.
I cannot personally assist you with your issue, but other members of this Forum much more knowledgeable than me in this area will chime in.
mikez71
Full Access Member
- Joined
- Mar 9, 2023
- Posts
- 1,238
- Reaction score
- 1,422
How weird. They have seperate signals to the BCM. (Body Control Module)
The fronts interface with the their respective door switches (modules) that communicate over the network.
The rears have their own signal inputs to the BCM.. And there are different ground zones so I don't think it's one bad ground.
I would have to guess it's the BCM.. ?
The fronts interface with the their respective door switches (modules) that communicate over the network.
The rears have their own signal inputs to the BCM.. And there are different ground zones so I don't think it's one bad ground.
I would have to guess it's the BCM.. ?
