Dropping the back more?

[Getinyukinlower]

Hey guys, I got a 2002 Yukon a couple of months ago and have been customizing it a little bit. I put a 2/3 belltech drop with keys and springs then cranked the keys all the way down. The front sits exactly where I want it to but the back is way to high. Where can I find 4" or 5" drop springs for the back? Or can I modify the factory or after market drop springs I already have?

 

[red02chevy]

I'd recommend the Belltech trailblazer 4230 coils. They ride amazing and net the amount of drop you're looking for. I am running them on my girls 07 Tahoe with one coil cut off and the ride/stance is perfect. Make sure you remove the bump stop mount off the frame aswell to give you some travel

 

[Getinyukinlower]

So I was looking at trying to cut a coil off the ones I have or the factory ones. But when I was looking at them to cut I thought it wouldt work because the cups the coils sit in. How do you make it work? But I will have to check them out! Thanks

 

[red02chevy]

So I was looking at trying to cut a coil off the ones I have or the factory ones. But when I was looking at them to cut I thought it wouldt work because the cups the coils sit in. How do you make it work? But I will have to check them out! Thanks

there some holes in the upper spring pocket and I just put the end of one coil in there.

 

[Getinyukinlower]

Sweet and that holds the spring in with no slipping or popping out? I will check that out and get it done if that's all I need to do!! Thanks

 

[Getinyukinlower]

there some holes in the upper spring pocket and I just put the end of one coil in there.

could you post some pictures of how you did it? if i have those holes i am going to do it wednesday after work! thanks

 

[blueflamed03]

Tony told me to get the adjustable kit...then you can take it (up or down) where you want...

 

[Getinyukinlower]

Tony told me to get the adjustable kit...then you can take it (up or down) where you want...

Where would I get those at? I'm trying to get it done with a budget for now that's why I was thinking off chopping them...

 

[blueflamed03]

http://tbssowners.com/store/index.php?act=viewProd&productId=145

 

[Getinyukinlower]

http://tbssowners.com/store/index.php?act=viewProd&productId=145

Those would be cool but I already have 3" drop spring on it. I need 1.5" or 2" more in the back. That's why I'm considering cutting them...