e-fan question

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ForgottenKnight03

TYF Newbie
Joined
Mar 29, 2011
Posts
21
Reaction score
0
After installing 05+ fans in my 02 this evening using a nelsons harness and blackbear tune, I started my truck and noticed that with A/C on, only the passenger side fan was spinning in high speed. I turned off the A/C in the truck, and that same fan stayed on. The truck seemed to be right around 190* the whole time while at idel in the driveway for about 20 mins (and after a short cruze around the block) When I disconnected the pigtail on the nelson harness that controls the fans for a/c operation, both fans would kick on low shortly after. is this working correctly? Do I connect to the light green wire or the green with white stripe? Thanks!
 

slocaddy

Full Access Member
Joined
Jan 14, 2010
Posts
217
Reaction score
3
Location
sarasota fl
you may have tapped the wrong green wire. if i remember right the insrtuctions say to tap the "lighter of the two green wires" or whatever it said (think theres only two) witch i did and was why i was certain i did it right. i switched and wala! just try it.
 

slocaddy

Full Access Member
Joined
Jan 14, 2010
Posts
217
Reaction score
3
Location
sarasota fl
not much, put brakes on my truck last week-it stops now! didnt know you were on here
 

Forum statistics

Threads
132,165
Posts
1,863,327
Members
96,671
Latest member
Dieseldr
Top