Factory subwoofer

[02_Tahoe]

The factory sub is blown in my Tahoe and I don't feel like replacing it right now because I'm doing other work to it so is there any way I can disconnect it, like a plug somewhere?

 

[Fosscore]

Is your box behind the driver's side rear? If so, remove that panel and there should be a plug coming in from the wiring harness underneath to the box that you could disconnect the sub from the rest of the system. Or remove the sub totally as there will be 2 spade connectors inside the box to the subwoofer directly. If you haven't removed that panel before, there are 3 screws you need to take out before you start pulling. Let me know if you have any other questions.


@02_Tahoe

 

[02_Tahoe]

Is your box behind the driver's side rear? If so, remove that panel and there should be a plug coming in from the wiring harness underneath to the box that you could disconnect the sub from the rest of the system. Or remove the sub totally as there will be 2 spade connectors inside the box to the subwoofer directly. If you haven't removed that panel before, there are 3 screws you need to take out before you start pulling. Let me know if you have any other questions.


@02_Tahoe

View attachment 60983

I got the panel off fine and found the plug and disconnected it, now music sounds a lot better, thanks for your help

 

[Fosscore]

Yeah man. Happy to help. Now just order this sub to replace your blown OEM one and you are back in business.

Kicker 40CWS82

 

[02_Tahoe]

Yeah man. Happy to help. Now just order this sub to replace your blown OEM one and you are back in business.

Kicker 40CWS82

Seems like a good price compared to others, but is it an exact fit or do I need to do sone trimming?

 

[Fosscore]

I was looking for the thread, but can't seem to locate it. That Kicker gets good reviews on fitment. Depth maximum for mounting in the box is about 4 inches. Probably will not line up the holes exactly and guys just drilled it into the box where the existing subwoofer holes were. The sub should cover the box holes or you can silicone over them.

There is this JL 8 inch with mounting depth of 3 7/8 but more $$ and it is 4 ohm, whereas the Kicker is 2 ohm.
http://www.crutchfield.com/p_136920...53305&awat=pla&awnw=g&awcr=49161121105&awdv=c

Should not need to trim anything with regards to the box, based on what has been relayed online.

 

[02_Tahoe]

I was looking for the thread, but can't seem to locate it. That Kicker gets good reviews on fitment. Depth maximum for mounting in the box is about 4 inches. Probably will not line up the holes exactly and guys just drilled it into the box where the existing subwoofer holes were. The sub should cover the box holes or you can silicone over them.

There is this JL 8 inch with mounting depth of 3 7/8 but more $$ and it is 4 ohm, whereas the Kicker is 2 ohm.
http://www.crutchfield.com/p_136920...53305&awat=pla&awnw=g&awcr=49161121105&awdv=c

Should not need to trim anything with regards to the box, based on what has been relayed online.

Ok, thanks for the help

 

[Flexx]

I thought the factory sub was in the center console and the speaker grill in the back was fake?

Sent from my HTC One M9 using Tapatalk

 

[osiris94ej]

I thought the factory sub was in the center console and the speaker grill in the back was fake?

Sent from my HTC One M9 using Tapatalk

2003+ have the bose center console sub, 00-02 have the sub in the LR quarter panel.

 

[Flexx]

2003+ have the bose center console sub, 00-02 have the sub in the LR quarter panel.

I see. Never knew that.

Sent from my HTC One M9 using Tapatalk