Finally Jumped on the Oil Catch Can Bandwagon

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

iamdub

Full Access Member
Joined
Apr 23, 2016
Posts
20,821
Reaction score
44,943
Location
Li'l Weezyana
When you get the chance could you take a photo of the restrictor kit you have please.
If it would be an advantage to use that instead of blocking off completely and throwing codes until tuned.
Would probably fit in a mailing envelope?
Cheers Tony

Oops. So, this thing has been used. Not that it matters since it has nothing to wear out. Anyway, here's the pics:

IMG_5447.JPG IMG_5448.JPG


It's aluminum, appears to be 3/8- excuse me, "9.5mm". It'd be easy to replicate and I can give you the size of the holes.
 
Last edited:
OP
OP
Jason in DLH

Jason in DLH

Cheeseburger and Fries
Joined
Sep 4, 2020
Posts
1,400
Reaction score
1,562
Location
MN
So tonight was the first time driving with the new Catch Can. Drove 20 minutes (a few WOT runs to clean things up ;)) and I can’t believe how much oil is in the can just from 20 minutes of driving....

18F09CE9-A413-49DE-9F3A-020E3B86B0C9.jpeg
 

Caligirl

Full Access Member
Joined
Mar 3, 2021
Posts
133
Reaction score
138
Location
California
So what happens if you don't empty it out when it is full? I hesitate to add more stuff to have to check (i.e. nag my husband to check haha). I can certainly do the "normal" vehicle checks like fluid levels etc, but not sure about the catch can. Will it overflow, or just stop "catching"? Would it cause more harm than good if it was not emptied when full?
 

97YukonNZ

Full Access Member
Joined
Feb 12, 2021
Posts
1,381
Reaction score
3,767
Oops. So, this thing has been used. Not that it matters since it has nothing to wear out. Anyway, here's the pics:

View attachment 274188 View attachment 274189


It's aluminum, appears to be 3/8- excuse me, "9.5mm". It'd be easy to replicate and I can give you the size of the holes.
Hey [emoji870]
Yes looks like I could make that,already have some gasket sheet handy. The holes look like they might be around 3/8 as well. I have a countersink bit around 13-14 mm
Sorry 1/2 9/16 [emoji6] lol (cheeky) I am old so imperial has been part of my life before we went metric.[emoji69] haha
I had a look at the catch cans. Pretty cheap. I like the red one [emoji106]
If I was to breath both rocker covers into a breather can would I be able to cap the intake near the throttle body and on the manifold without any problems or does there need to be connection through these things?
Lots of questions, hope they make sense.
Thanks [emoji111]

Sent from my SM-G950F using Tapatalk
 
OP
OP
Jason in DLH

Jason in DLH

Cheeseburger and Fries
Joined
Sep 4, 2020
Posts
1,400
Reaction score
1,562
Location
MN
So what happens if you don't empty it out when it is full? I hesitate to add more stuff to have to check (i.e. nag my husband to check haha). I can certainly do the "normal" vehicle checks like fluid levels etc, but not sure about the catch can. Will it overflow, or just stop "catching"? Would it cause more harm than good if it was not emptied when full?

My thoughts are is that you’ll be better off not installing a catch can if you think you won’t be able to drain it periodically. I’ll be draining mine every 250 miles in our cold winters and 500 miles during the summer for the first year. I’ll adjust accordingly after I gauge how often it needs to be drained.

I can’t imagine having all that water, oil, and fuel overflowing into the intake would be good.

I’m sure your husband won’t mind checking it. ;)
 

Caligirl

Full Access Member
Joined
Mar 3, 2021
Posts
133
Reaction score
138
Location
California
My thoughts are is that you’ll be better off not installing a catch can if you think you won’t be able to drain it periodically. I’ll be draining mine every 250 miles in our cold winters and 500 miles during the summer for the first year. I’ll adjust accordingly after I gauge how often it needs to be drained.

I can’t imagine having all that water, oil, and fuel overflowing into the intake would be good.

I’m sure your husband won’t mind checking it. ;)

He works like a dog most weeks 45-50 plus 2 hrs of commute each day. I hate putting more on his plate.

Hmmm, more research needed on ease of use and accessibility once installed.
 
Joined
Apr 11, 2018
Posts
7,124
Reaction score
14,364
Location
St. Louis
He works like a dog most weeks 45-50 plus 2 hrs of commute each day. I hate putting more on his plate.

Hmmm, more research needed on ease of use and accessibility once installed.
Just get a larger capacity one if worried about it.

I mounted mine up near the front on drivers side, behind the washer fluid reservoir and over the spare battery tray. It make it easily accessible plus I can set a small empty butter tub or cup under it when draining and don't have to stand there holding it.

Mine's a 2012 and came with the updated pcv valve cover and I drain mine at an oil change and halfway between oil changes, so about every 2500 miles, and I only get about a shot glass worth out of it, so I could probably go with only draining it at every oil change. 4774ea41e00399a4b3527f3a6b3702dd.jpg

Sent from my SM-G930V using Tapatalk
 
OP
OP
Jason in DLH

Jason in DLH

Cheeseburger and Fries
Joined
Sep 4, 2020
Posts
1,400
Reaction score
1,562
Location
MN
He works like a dog most weeks 45-50 plus 2 hrs of commute each day. I hate putting more on his plate.

Hmmm, more research needed on ease of use and accessibility once installed.

I agree with @gooffeyguy . They make much larger ones than the one I installed AND with an easy to use valve at the bottom. For easier installation you’ll want to find one with 3/8” NPT inlet/outlet. You can always use increasers/reducers if you can’t find one that size.

I’ll be threading in my own valve on mine when I feel up to it.
 

Forum statistics

Threads
132,314
Posts
1,865,812
Members
96,907
Latest member
Cbrandes
Top