first posting and on board air system

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Atomic

Full Access Member
Joined
Nov 27, 2013
Posts
216
Reaction score
16
Location
Huntsville, AL
The ratchet strap cracked me up! I would recommend some brackets pretty soon haha

I used to have an onboard air system, 5 gal tank, 2 viair compressor, nathan k3, etc. Lot of fun but it seemed like I was always having to mess with wiring, pressure switches, leaks, etc. Very useful though!
 
OP
OP
lbouisseyjr

lbouisseyjr

TYF Newbie
Joined
May 18, 2013
Posts
22
Reaction score
5
Location
mount holly nj
Yeah I am working out something for brackets right now..guess the anticipation got the best of me on that one..lol..
 
OP
OP
lbouisseyjr

lbouisseyjr

TYF Newbie
Joined
May 18, 2013
Posts
22
Reaction score
5
Location
mount holly nj
finally had the time to make a bracket for the tank. took me a few hours to make and a lot of patience with it, but its better than the ratchet straps..i can now put my spare tire back on and call it a day. the only thing left i need to do is order the Viair mounting bracket for the compressor and that will be set. so far this thing has been awesome!!

attachment.php


attachment.php
 

Attachments

  • photo 4.jpg
    photo 4.jpg
    91.9 KB · Views: 60
  • photo 5.jpg
    photo 5.jpg
    94.9 KB · Views: 60
Last edited by a moderator:

livingez_123

Full Access Member
Joined
Feb 18, 2013
Posts
1,798
Reaction score
112
Location
Sandy, OR
Well I see an issue with your setup. You have all of your fittings on the bottom of your tank. Where does water collect? On the bottom. Your pressure switch and wiring are on the bottom asking to be knocked off from road debris. All of the water will be blown out the horn causing a short life span. Time to re-think your install and move it to a better/safer place.
 

NathanJax

Vacation Nathan
Staff member
Administrator
Supporting Member
Joined
May 9, 2009
Posts
49,135
Reaction score
943,577,170
Location
Jax, Fl
Well I see an issue with your setup. You have all of your fittings on the bottom of your tank. Where does water collect? On the bottom. Your pressure switch and wiring are on the bottom asking to be knocked off from road debris. All of the water will be blown out the horn causing a short life span. Time to re-think your install and move it to a better/safer place.

x2

fittings, lines need to be up top and drain plug on bottom. You're almost asking it to fail
 
OP
OP
lbouisseyjr

lbouisseyjr

TYF Newbie
Joined
May 18, 2013
Posts
22
Reaction score
5
Location
mount holly nj
makes sense...honestly did not even think about any of that happening. with that said, i can just switch where the safety relief and drain fittings around and flip the tank so everything is on top. ill get on it probably tomorrow when its nice out. not sure where else to mount the tank itself but ill look underneath and see.. thanks for the help and advice guys, its a big help!!
 

Phil DeVtec

Full Access Member
Joined
Dec 2, 2012
Posts
155
Reaction score
0
Location
South Jersey
Nice system. I was looking for something like this because I air down a lot when I'm on the beach and need something to get me back up into the 30's quickly. Thanks for this thread man.
 

Forum statistics

Threads
132,713
Posts
1,873,070
Members
97,537
Latest member
CHENTE

Latest posts

Top