Fog HID's Ballast

[DeezHoe03]

Can somebody please post pic's of where the mounted their ballast for the fog lights so I can get an idea for the rights spot

 

[chauncey0337]

There's no right or wrong spot, just make sure it's secure. I mounted mine behind the front bumper right above the bumper support.

 

[NJ04HOE]

There's no right or wrong spot, just make sure it's secure. I mounted mine behind the front bumper right above the bumper support.

That's exactly where mine has been for 4yrs...zip tie it and you won't have to worry about them.


Sent from my iPhone 4 using Tapatalk

 

[DeezHoe03]

Thanks a lot fellas, appreciate the help

 

[Nuuze]

I just tie-wrapped the to the factory harness of the foglight where it T's off.

 

[Travieso]

I actually screwed in the bumper support with 3 screws, man that's some hard steel i tell u

 

[gdddup]

mine are zip tied to the bumper support

 

[Warrior14]

I dont have a picture but i mounted mine to the back side (side facing engine) of the skid plate. All i had to do was remove 4 screws and put 2 half inch self taping screws in it and done. Havent had any problems. I also ran my wires along the frame and zip tied them down.

 

[IcebergSlim]

Does it overheat in the summertime? We reach about 110 out here in Phoenix.

 

[MrBalll]

Does it overheat in the summertime? We reach about 110 out here in Phoenix.

I ran mine where I'm at and I don't think it ever got to 110, but it did get over 100. I honestly never ran them but maybe two or three times during that heat. But, my headlights never overheated and they are next to the engine...sort of.