Fog light replacements

[ezdaar]

yess. just the projector driving lights.
55watt 4500k makes ALOT of usable light.

Just be sure to run a relay harness and upgrade the fuse to one of these circuit breakers, as the standard fuse holders melt.

 

[Big Buttons]

Any problems with them melting the housing?

 

[ezdaar]

the housing is metal with glass lens.

This is the Projector light thats stuffed into that extra housing.
Shown is the light mounted to OEM denali fog bracket.
its from my how-to thread from way back.

 

[Tahoewhat]

yess. just the projector driving lights.
55watt 4500k makes ALOT of usable light.

Just be sure to run a relay harness and upgrade the fuse to one of these circuit breakers, as the standard fuse holders melt.

Wow, that is a lot of light output. I figured those projectors would be terrible being ebay specials. But think you may of just changed it.

Does the fuse melt b/c of the 55w? How would 35w look you think?

And where is this how-to thread?

 

[ezdaar]

All the instruction how to mod the brackets and install the lights are on the actual pictures in the link below.
Now that I think about it, I dont think I ever made a how to thread.

Bottom of page one and on page 2.
http://s803.photobucket.com/user/ezdaar/library/Denali/Projector fog mods?sort=3&page=1

 

[redemn93]

so the projectors in your album are the ones from the ebay auction link? how long ago did you do this? holding up well?

what do you mean by relay harness? like this? will they still come on with the factory fog switch when all said and done? should the breaker go between the light and relay or power source and relay? I really like the looks of this.

 

[ezdaar]

The Projectors are the same ones installed in that plastic plate thing with the ugly LED's.
They are working great, no water or road damage. been running strong over 2 years now with 55watt bulbs.

http://www.ddmtuning.com/Products/HID-Kit-Wiring-Harness
replace the shit fuse on that harness with the breaker.

Use this picture as reference only, this is NOT my picture. Every one of the 7 harnesses I have orderd was complete.
A few needed the +/- wires on the headlight plugs swapped around.

 

[redemn93]

cool. thanks man.

 

[bigbird189]

Did you just mod the ebay projectors? I see there are different bulbs mounting then the ebay if they are the ebay ones. If not where did those come from? Also couldn't you cut a hole in the OEM housing and and put the projector into it to retain the factory housing so there is not a huge gap from the bumper and light housing?

 

[ezdaar]

closest thing I could find to mine. here


make your own panel to fill in the gap with this