Fuel Blitz Wheels with Factory Tires?

[Jandy]

Question for all you tire/wheel experts: I just got a 2024 Suburban Z71 with the 275/60R20 Goodyear Wrangler setup. I want to swap the wheels and get the Fuel Blitz gloss black wheels. With the tires being brand new, I figured I would just run them on the new wheels. Will this be an issue, or will the stock tires mount up on the Fuel Blitz 20x9 wheels just fine?
Also, I'd like to get a slightly wider stance for a little more aggressive look, what backspacing should I get in order to have the tires roughly an inch wider than the stock wheels?

Thanks!

 

[Big Mama]

If your stock wheels are 9” then the tires are fine. There is a wheel size calculator on line that can help with offset. My guess is around 10-15 should do it.

 

[djnice]

Stock offset is around 28 mm, you can google or look at the back of your wheels. 1" = 25.4 mm. So a +1 offset will move them out about 1.1". I think you can only get the blitz in 16 or 1. 16 offset is only going to move them about 12mm or 1/2".

Here you can see what 1 offset looks like with slightly wider tires.

2024 Yukon AT4 with Fuel Blitz rims and Toyo AT3s

Sharing a few photos of my Yukon with original wheels/tires and aftermarket. Not great photo weather. I might add some others when the sun comes back. - Wheels are 20x9 Fuel Blitz +1 offset - Tires are P rated 285/60/20 Toyo Open Country AT3 It is pretty much what I was after. I will get a lift...

www.tahoeyukonforum.com