Full size spare wheel tire, pics inside

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Slow5.0

Full Access Member
Joined
Mar 26, 2011
Posts
435
Reaction score
212
Location
Missouri
Well since i installed Wilwood BBK i needed to get some 20" wheels and tires for winter time bc i wanted to save 22" OEM snow flake wheels from salt. Since 2016 i had 17" Blizzaks mounted on Cragar Soft 8s but with Willwood i needed 20" . So i got black 4 12 spoke Yukon/Sierra replicas from market place and one more from Amazon for spare. For space i bought Nitto 420V 275-55/20", i will be using same 420Vs on my 22" when they get bold. Anyway. I read somewhere that full size wheel cant be installed on spare tire hoist because its too heavy. Well i weight 17" steer spare wheel and tire. 69.9 lbs. Than i weight 20" black replica with Nitto tire. 70.1lbs. So yeah houst will hold it. Also i weight 22" OEM snow flake, 80lbs even.Ground clearance between ground and spare tire mounted with OEM 17 spare wheel/tire is 7.5" with 2/4 drop, with 20" full size wheel/tire is 7". Here is some pics

Resized_20210928_131648.jpegResized_20210928_131655.jpegResized_20210928_132419.jpegResized_20210928_130604.jpegResized_20210928_132544.jpeg
 

Jeff_

Full Access Member
Joined
Jan 9, 2021
Posts
297
Reaction score
367
Location
Scottsdale, AZ & N. Idaho
Very nice, thanks for sharing.
I've contemplated getting a full size spare mounted up but wasn't sure if the diameter would be too big to fit it under there.
I run a 275/70/18 so I'll need to do some measuring..but now I have the motivation.
I'll need to see if a 265/75/17 BFG K02 will fit on the 17" spare and not be too large/heavy.
 
Last edited:
OP
OP
Slow5.0

Slow5.0

Full Access Member
Joined
Mar 26, 2011
Posts
435
Reaction score
212
Location
Missouri
With 275/55/20 tire or 31.9 overal diameter i had about 1/4 gap between rear of tire and bumper and 1" between fromt of tire and 32mm Eiback swaybar, OEM rear swaybar is 28mm. So your 265/70/18 is 33.2" and 265/75/17 is 32.6". Both of them should fit and you could push against that bottom lip of rear bumper so bumper doesnt flap like i see on many cars doing 70mph, and i see them a lot doing that all day long behind of steering wheel on my 18-wheeler
 

WingsAA

CMFIC
Joined
May 28, 2009
Posts
452
Reaction score
51
Location
Dallas, TX
I have a full size 22in Denali wheel mounted under my Yukon XL Denali on the stock 285/45/22. No issues for a long time now. Do yourself a favor Slow5.0 and flip it over so the wheel face is facing up toward the body. You'll reduce the scuffing/etc. from road debris/gravel/etc.
 

bill1013

Full Access Member
Joined
Jul 7, 2020
Posts
456
Reaction score
979
Location
Waianae, Hawaii
Is it just my old eyes(?) or does that spare hang just a little too low? IMO it looks like it will get ripped off when you go over a speed bump. But if it works for you!
 
OP
OP
Slow5.0

Slow5.0

Full Access Member
Joined
Mar 26, 2011
Posts
435
Reaction score
212
Location
Missouri
Oem spare tire is 265/70-17, this full size 275/55-20 so full size is wider. Also pics with 17" spare was taken from higher position. Anyway in 1st post i said with 17" spare with 2/4 drop is 7.5" between ground and spare tire in the front. With full size 20" is 7". So its 1/2 lower now. With stock height and big a$$ rake on the back clearance would be 11" and would clear any speed bump out there
 

Forum statistics

Threads
132,371
Posts
1,866,913
Members
96,997
Latest member
jonestheclem
Top