good budget speaker amp

[the big blue bus]

ive installed an alpine cde-123 headunit and i love it. ive replaced the front door speakers with some pioneer G1643R 6.5s and i have a set comming for the rear door too. im going to remove the ones from the roof all the way in the back since ill have subs eventually.

whats a good amp for those 4 speakers? would i just need a 4 channel 2-300 watt amp? whats the best speaker wire to get or can i just get some from like radio shack or somewhere. and i guess the best place to put the amp would be under the seat? i have chains and straps under the rear seats so id rather put it under one of the front seats.

 

[awsomeaussies206]

The size depends what the speakers put out, whats the rms combined and what's the peak combined... but a 4 channel is what you need.

 

[the big blue bus]

MAX POWER 180W
RMS POWER 30 W
IMPEDANCE 4 OHM

those are the specs on them

 

[SunlitComet]

30 watts rms? A OEM amp from a stock Bose system could do that nicely. See if you can find locally. And for that little power you can use 18 ga wire from Radio Shack.

 

[the big blue bus]

i have an amp from a denali thats bose but i dont know specs on it

 

[SunlitComet]

they go about 25-35 watts continuous. get me the year and model details of where the amp came from and I can email you the pinouts/schematics on how to hook it up.

 

[the big blue bus]

99 or 00 yukon denali obs. damn i should of kept the plug off it now :/

 

[bigblacktahoe]

if ya got the alpine deck, check out the alpine ktp-445. plugs into the decks harness and puts out 45 watts rms, 90 watts peak. easy install.

 

[SunlitComet]

99 or 00 yukon denali obs. damn i should of kept the plug off it now :/

You need to PM your email address to me. Use the subject line to describe the required info please.

 

[the big blue bus]

how do you remove the back door pannels to replace the speakers?