I replaced the chrome interior door handle on the passenger side and now the seat warmer won't work. I popped up the control panel on the door to make sure the wire plugs were all seated in tight and correct. Then I looked at some fuses, there aren't any marked specifically for the seat warmer that I could find. Found passenger seat control or something like that, that fuse was fine. Anyone had this problem after switching out a peeling chrome handle?
Has anyone had seat warmer go out after door handle replacement?
- Thread starter Vermtown
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Hah, well I feel like a *******. Got a new switch and was going to plug it in to see if it solved the problem. Couldn't see where the old switch was plugged in at, realized that it wasn't plugged in! I thought I had all the plugs in but sure enough, the switch plug was wedged down in the door somewhere. Fished it out and works fine now, measure twice cut once I guess 
massivespl
I'm not mean, I'm honest.
Silly goose
