Most Hated
Member
- Joined
- Mar 4, 2012
- Posts
- 40
- Reaction score
- 3
I was in a small collision a little while back which damaged both headlights and the bumper cover. I just got my truck back from the shop and don't like how the headlights lined up. The passenger side looks ok in relation to the edge along the fender, the top, and the inner edge along side where the bumper cover comes up and around the grill. However, the gap between the bottom of the headlight and the bumper cover is different. The gap gradually gets bigger from the outer edge of the headlight towards the inner. Is this normal?
Then on the driver side headlight, the bumper cover sticks out about a half inch further than the face of the headlight on the inner and lower edge. The collision didn't bend or damage anything behind the headlights to prevent them from lining up properly so I don't know what would cause this. They seem to be properly aimed too. This one also has the gap on the bottom edge get gradually bigger from the outside towards the inside.
I can probably live with the passenger side but the driver side pisses me off.
Then on the driver side headlight, the bumper cover sticks out about a half inch further than the face of the headlight on the inner and lower edge. The collision didn't bend or damage anything behind the headlights to prevent them from lining up properly so I don't know what would cause this. They seem to be properly aimed too. This one also has the gap on the bottom edge get gradually bigger from the outside towards the inside.
I can probably live with the passenger side but the driver side pisses me off.
