Heater Control a/c

[vendo]

the A/C button stopped working and recirc button,,what could it be?..i jumped the relay and a/c blows cold,but can turn it on...advice?

 

[wjburken]

Welcome to the forum from Iowa.

If you could share a little more information about your vehicle like year, trim package, mileage, etc., that will help folks help you.

@UmmScott is a pretty good resource around here for HVAC stuff.

 

[UmmScott]

Yup need more info man.
What year, etc.. what HVAC control head is in your vehicle? Etc

Sent from my SM-G975U using Tapatalk

 

[vendo]

its a 95 tahoe 2 dr LS ,standard head hvac ..didnt know there was more than 1,175k on truck...350 eng.

 

[UmmScott]

Need to do electrical testing. Start with all fuses and relays. Make sure control head is getting power. Do other functions work? Mode doors, blend doors, blower on all speeds, etc?

Could be a bad control head. Gotta test it to know for sure.

Sent from my SM-G975U using Tapatalk

 

[vendo]

ok,fuses are good and the blend doors work..

 

[UmmScott]

ok,fuses are good and the blend doors work..

Ok what else?

Do the lights work if there are any on the control head? Are they buttons that push and click/hold in? Are they just push buttons that light up when you push them?

Pretty sure on that older style they have a little orange light on them that lights up when you push them.
If they aren't coming on then chances are the control head itself is your problem.


Sent from my SM-G975U using Tapatalk

 

[vendo]

yea some of the lights are out..1995,gee what the F lol..yea there is a light on the ac button,it just stopped lighting up..truck has no rot..lines are little but the truck is mint,was from FLA.

 

[Joseph Garcia]

Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

As you can see, you are in good hands with assistance from folks here, helping you diagnose and correct your current A/C issue.

I hope that you will become a participating member in the Forum's discussions.

Pics, please.

 

[Marbor]

See if u can find a replacement unit at a bone yard for cheap may be an issue with the unit itself.