HELP!! - 2012 Eski Premium headlights - advice

[FatDog]

If not then we can find a junkyard headlight and swap the led module inside we can get it done for you or buy a new headlight don't get used at this point.


Sent from my iPhone using Tapatalk

Okay.....

I know what a new headlight runs, so any idea what it would cost to have you do this swap out???

Came across this too?????

http://www.ebay.com/itm/07-14-PLATI...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

 

[Vanquish Auto]

I would need to look for a broken headlight first but no more than $350 for my work including shipping to you. I'm certain the $19.99 fix will get it done just right. If it was the hid headlight( which they go out a lot) would be a $60 fix with a new ballast


Sent from my iPhone using Tapatalk

 

[FatDog]

I would need to look for a broken headlight first but no more than $350 for my work including shipping to you. I'm certain the $19.99 fix will get it done just right. If it was the hid headlight( which they go out a lot) would be a $60 fix with a new ballast


Sent from my iPhone using Tapatalk

Okay.......I'm beginning to breath again and the chest pains are subsiding.....ha ha. That started when I seen the 1600.00 price tag for a new light!!!! LOL I couldn't believe my eyes when I seen that!! Especially when warranty just ended roughly last month.

I'll let ya know when that module gets here and I rip into it, hopefully that does the trick.

Again, thanks a ton and I know who I will be recommending to my friends !

 

[Vanquish Auto]

I really appreciate it. I'm here to help you and anyone when it comes about lighting since that's what we do.


Sent from my iPhone using Tapatalk

 

[FatDog]

I really appreciate it. I'm here to help you and anyone when it comes about lighting since that's what we do.


Sent from my iPhone using Tapatalk

Well,

I checked the Eski when she got home the other night and the light was working?????? I've been watching it the last few days and no issues. So.......either my wife was on crack ......or it was actually out and its back on and working fine.

I got the control module you suggested and gave me the link to, so I think I'll just wait and see what happens and go from there.

Again, thanks for all the assistance, it's truly appreciated!

 

[Vanquish Auto]

I think I know what could be the issue. Did it go through a car wash recently? Those headlights tend to open up by the corners over time. You might want to take them out and use the General Electric clear silicone II and apply it on every funny gap you see in there.


Sent from my iPhone using Tapatalk

 

[Vanquish Auto]

Definitely on the driver too


Sent from my iPhone using Tapatalk

 

[FatDog]

Definitely on the driver too


Sent from my iPhone using Tapatalk

Ahhh very interesting with regard to the water! Don't really go through car washes but.......I did just wash it the day before with my pressure washer. I'll definitely look into sealing them up better!

I assume remove them completely to inspect thoroughly or is there a way to check these areas with leaving them in??

Again......thanks!

 

[Vanquish Auto]

That's right remove them completely and also avoid direct wash with the pressure washer. You're welcome hopefully won't have more problems


Sent from my iPhone using Tapatalk