Help me fit a double din in my 02 Denali

[trdhulk]

My buddy just got a 02 Denali. He wants to install a double din nav system but it looks like one will not fit. He is really picky about fit and finish. Does anyone know of a nice, clean way to install a in dash double din unit in this truck?

 

[NathanJax]

There's a sticky at the top of the page you made this post at...

http://www.tahoeyukonforum.com/forum/showthread.php?t=595

 

[trdhulk]

The deanli dash that i pictured looks to have a smaller opening than the dash pictured in that thread.. Thats the problem he's running into

 

[Big Buttons]

On that dash you have to cut the opening bigger to fit the DD. pre 03s are din and a halfs.

 

[trdhulk]

Is there a way to retro a 05 or 06 dash peice to fit in his 01? Here are pics of an 06

 

[Big Buttons]

Yes but have to get the "basket" that holds the a/c and stuff with it. Also If the center counsel goes all the way up to the dash it will fit funny.

 

[livingez_123]

just take the time to cut it larger for it to fit. there is a bunch of stuff on the market that make the job not to hard to do. match the radius with filler and sand and repeat time and time again until he is happy.
Also the sticky at the top of this page has good info in it.

 

[EMF Audio]

Is there a way to retro a 05 or 06 dash peice to fit in his 01? Here are pics of an 06

Yes. I just put an 06 Escalade dash in my 99 Sierra and had to do modifications because the inside of my dash is still the 99, just the outside is the 06.

You will need the double DIN bucket from an 03-06 and the bezel from an 03-06. The climate controls are a tad wider and the mount is different on his, so climate controls will have to be modified to fit, but it's not terrible.

[/IMG]

 

[SATXTAHOE]

Another way of doing it:
http://www.cardomain.com/ride/825435/1999-chevrolet-silverado-1500-extended-cab-short-bed/page-3/

 

[Jdeshler]

You will have to cut the metal bracket in the dash behind the 1.5 din off to fit a double din..