Help me fit a double din in my 02 Denali

[Jdeshler]

Here's the cut

Finished


Very worth the effort

 

[Justplayinn]

Here's the cut

Finished


Very worth the effort

did you move the HVAC?

 

[Jdeshler]

I didn't move any of that, I just trimmed the top of the dash bezel and adjusted the stereo up

It could be trimmed more but I'll do that later

 

[blaqout]

This is the best video I've seen on doing it with the newer bezel and cage. I wonder if you use the 03-06 climate control if it will be easier.
http://www.youtube.com/watch?v=cbybEFH3cgg

 

[livingez_123]

I appreciate the guys effort on the youtube video, but he would never be allowed within 20' of my truck.

 

[blaqout]

I appreciate the guys effort on the youtube video, but he would never be allowed within 20' of my truck.

He was definitely "sloppy" but in theory, his method seemed to make the most sense. Also there is a video of the finished product and it came out nice.

 

[dbtahoe01]

i used a dremel and used and trimmed my standard bezel rather than buying a 03+ bezel.
i used CA glue to glue the DD bezel to the dash bezel.
filled the gaps with Evercoat Maxim. sanded then painted..
i actually copied mine from another build... came out perfect.

---------- Post added at 08:09 PM ---------- Previous post was at 08:08 PM ----------

here's pics from the thread that i copied mine from
http://www.stevemeadedesigns.com/bo...-season-rebuild-2012-quest-for-160-db/page-12

 

[Pachanga02]

That dash piece came out really nice. I'd like to fix mine to look like that.

 

[blaqout]

I just did this using the bezel and radio cage from an 03-06. It wasn't too terrible. The metal bracket does not have to be cut, it really just depends on the radio you get. I used a Kenwood DDX470 and it fit fine. It was tight, but still fit.