HELP!!! Need to remove tint/clearcoat from tails!!!

[4x4play]

Ok, here's the deal I bought a set of used IPCW upper quater pannel lights and decided to tint them to match my tails, they looked good until I got to the wetsanding point and then I noticed white specs all in the clearcoat. I think pollen might have settled in as it was drying. not really sure. But basically they look like s**t!!!! What would be the easiest way to remove the clearcoat/ tint to redo it. I painted the housing to match my truck so I do not want to use anything harsh that might ruin the paint. I'm thinking just sanding the hell out of them with 1000g to remove it all and redo them. Thoughts, insite anything that would make this easy and not ruin them. Thanks,

 

[blueflamed03]

try mineral spirits.

 

[edgaranah1]

try mineral spirits.

Great response

 

[BOSS]

500 grit, 800 grit, 2000 grit, 3000 wet sand...plastic polish, good as new or better depending on your skills

3M Makes a great headlight renewal kit, selling at AZ and Walmarts across the world
B

 

[4x4play]

Looks like I have my weekend project laid out for me!!!!! Thanks for the help.

 

[jmyler]

I don't know how harsh it is on paint but i used goo gone... or goof off... i can't remember which now to get an amazingly thick layer of tint off my tail lights. here is the thread

http://tinyurl.com/3wz33a5