help with halo lights
- Thread starter yogi1979
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
felixgun
Full Access Member
If I were you I would retro-fit projectors in the stock housing. If you get them custom made, you can get the halo's too...
ya like i said i am very new at this i saw some made by like spec-d, ipcw, and CG. i had 07 mustang gt and installed halo lights and adjusting the light was pain had to keep taking the dumper off to adjust the light and water got in it when ever i wash them. ya i love how they look but didn't have very good luck with some cheap product.. and i am not sure how to do what u are saying..
but thanks for info..
felixgun
Full Access Member
No problem Eddie. And btw... Welcome 
Many on this forum have gone with the aftermarket ones and turns out they are really terribly built (TERRIBLE quality)... projectors are cheaply made, halos are cheaply made, and the whole housing in general is cheaply made.
Retro-fitting in stock housing is when you take your normal head light housing that you have now, and get the normal low beam (and/or high beam) cut out, then putting in your own shroud/projector. Hopefully Sumo or SoulSea (2 TYF members who have done this) will chime in and post some pics. Sumo did it himself, and Serge went to a custom light shop. Both will have lots of great info for you.
Many on this forum have gone with the aftermarket ones and turns out they are really terribly built (TERRIBLE quality)... projectors are cheaply made, halos are cheaply made, and the whole housing in general is cheaply made.
Retro-fitting in stock housing is when you take your normal head light housing that you have now, and get the normal low beam (and/or high beam) cut out, then putting in your own shroud/projector. Hopefully Sumo or SoulSea (2 TYF members who have done this) will chime in and post some pics. Sumo did it himself, and Serge went to a custom light shop. Both will have lots of great info for you.
Gzes
the drifting 2dr
I bought aftermarket halos and got them in a couple days ago. I still have to put them I. But they dont look cheap
felixgun
Full Access Member
Don't you have an NBS though? The NNBS ones have been confirmed to be cheap/not good quality...
Gzes
the drifting 2dr
Yea I have the old style 94 hoe
thanks for your info. i live in small town called wheatland in wyoming. i would love to have some one do it good but i dont know any one who does work like this. if may be i can find some one online or something. thanks all you guys for ur help. by the way i like way ur head light looks. i would love to have mine done like that. what is cost for work like that?
