High idle at start up

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

95escahoe

Full Access Member
Joined
Aug 2, 2010
Posts
5,155
Reaction score
4,454
Cleaned the MAF & TB on my 04 6.0 Escalade along with an Airaid intake tube and filter idles fine in D & R just at start up it goes up to 2k then idles down to where it should in a second or 2, after driving it for a bit the PCM should adjust and it will fine?


Sent from my iPhone using Tapatalk
 

retiredsparky

Full Access Member
Joined
Jul 9, 2016
Posts
379
Reaction score
121
That is a strange symptom. Disconnect the wire connector to make sure there is no damage to the contacts. If it continues, something is amiss. Could you have left something unconnected such as intake air temp sensor?
 
OP
OP
95escahoe

95escahoe

Full Access Member
Joined
Aug 2, 2010
Posts
5,155
Reaction score
4,454
If anyone has this issue in the future disconnect the - battery cable for an hr, before you reconnect the cable pump the brakes 3x, hook it back up when start it it's gonna idle around 1500-1800 then idle down to where it should be let it run for 3 mins, shut it off for 3mins, then run for another 3 mins, then let it run in drive and reverse 3 mins each take it for a drive and your good to go


Sent from my iPhone using Tapatalk
 

Forum statistics

Threads
132,426
Posts
1,867,951
Members
97,107
Latest member
Wannabez71

Latest posts

Top