How to adjust hood to close gaps

[Factorywhip]

Had to buy a new hood, and it's from a 2002 GMC Sierra 1500 suppers to fit my 2002 GMC Yukon denali. Have been adjusting got the front down, but still can't get the back of the hood to come down. Just like 1 inch, please help

 

[Grocery Getter]

Had to buy a new hood, and it's from a 2002 GMC Sierra 1500 suppers to fit my 2002 GMC Yukon denali. Have been adjusting got the front down, but still can't get the back of the hood to come down. Just like 1 inch, please help

DITTO---Never have been able to get my HD hood gaps closed......

 

[alxs210]

DITTO---Never have been able to get my HD hood gaps closed......

same here..

 

[robb.]

ditto on that aswell

 

[Factorywhip]

Can some post pictures of factory hood where it connects, the hinges, hood latch, and rubber stops.

 

[corradovrsick]

how can i adjust the front of my hood theres a gap between the top of the grill and the hood about a half an inch?

 

[2000Yukon]

how can i adjust the front of my hood theres a gap between the top of the grill and the hood about a half an inch?

Open your hood and on both sides there rubber stops on threaded posts. If that isn't the problem I don't know what else you could do.

 

[corradovrsick]

yea thats what i figured would do it thanks

 

[Factorywhip]

Going to buy new hood hinge springs to see if that'll put more down pressure on it. I read springs may loose tension when you replace hood. I'll let you know what happens.

 

[Michigan]

Open your hood and on both sides there rubber stops on threaded posts. If that isn't the problem I don't know what else you could do.

Stupid question but how do you adjust these rubber stoppers? Mine will not move at all by hand

I just had the HD hood swapped today and it didn’t line up correctly but also my oem hood was not lined up correctly either. Actually the HD hood is not as bad as a gap

I’m trying to figure out if it’s a hinge problem, bracket problem or hopefully just the hood rubber bumper stopper problem. Did not play too much with it but the one side I tried today would not budge by hand.

If you look at the pic. The hood is sitting lower on the passanger headlight. I’m hoping or thinking just rasing that rubber stopper would fix it.