How To Clear Bumper Lense???

[Bamtastic14]

i have a 2003 Tahoe and i wanna clear my bumper lenses how do i go about doing that?

 

[01HDtahoeNJN]

I'd take 800 grit ..wet sand them all over the lens, then take 1000, the 1500 then 2000 grit then use clear paint from autozone or just a plastics clear coat like krylon/duplicolor and give it one coat 8 inches away 2-3 coats then wets sand 2000 grit then another 2-3 coats and they should look brand new!!! I'd also use a tooth brush and some simple green and hot water on the inside first to fully clean them!!! Let the paint dry 20-30 minutes in between wet sanding!!! Good luck!!!

 

[Bamtastic14]

I'd take 800 grit ..wet sand them all over the lens, then take 1000, the 1500 then 2000 grit then use clear paint from autozone or just a plastics clear coat like krylon/duplicolor and give it one coat 8 inches away 2-3 coats then wets sand 2000 grit then another 2-3 coats and they should look brand new!!! I'd also use a tooth brush and some simple green and hot water on the inside first to fully clean them!!! Let the paint dry 20-30 minutes in between wet sanding!!! Good luck!!!

cant you just open em up somehow?? and do it that way like you can with the silverado headlights>

 

[Mr.Jack]

I'd take 800 grit ..wet sand them all over the lens, then take 1000, the 1500 then 2000 grit then use clear paint from autozone or just a plastics clear coat like krylon/duplicolor and give it one coat 8 inches away 2-3 coats then wets sand 2000 grit then another 2-3 coats and they should look brand new!!! I'd also use a tooth brush and some simple green and hot water on the inside first to fully clean them!!! Let the paint dry 20-30 minutes in between wet sanding!!! Good luck!!!

Too much work for me. I’ll just buy new ones.

 

[01HDtahoeNJN]

If you bake them ad then bake them back together and bead them with clear silicone yes... Id do the outside first there's no point in opening them if you don't know if there bad inside... If you do the out side and there clear again your solid if you see that it's still foggy then bake them easiest way to do it IMHO

Too much work for me. I’ll just buy new ones.

Hahaha c'mon man... Takes less then 2 hours most of it is little prep work... Have a beer or two in between drying no big deal boom done an you have nice clean lenses aging looking fresh

 

[jeffyrc]

Whats the baking process intail, what are the steps?

 

[Bamtastic14]

yea i wanna know how to bake em i mean ill give it a shot worse thing ya do is **** em up and buy new ones lol

 

[RobertWYoung]

By clear do you mean removing the amber lens or clearing the fog from the clear lense?

http://www.tahoeyukonforum.com/forum/showthread.php?t=35708 is about removing the amber.

 

[Bamtastic14]

By clear do you mean removing the amber lens or clearing the fog from the clear lense?

http://www.tahoeyukonforum.com/forum/showthread.php?t=35708 is about removing the amber.

removing the ugly ass amber lenses lol

---------- Post added at 07:05 PM ---------- Previous post was at 07:03 PM ----------

By clear do you mean removing the amber lens or clearing the fog from the clear lense?

http://www.tahoeyukonforum.com/forum/showthread.php?t=35708 is about removing the amber.

thats for taking the amber out of the headlight i need to get it out of my bumper lenses

 

[chauncey0337]

thats for taking the amber out of the headlight i need to get it out of my bumper lenses

Should be the same process for signal housings too. I'm just not 100% sure if the amber is removable.