04ctd
Full Access Member
i supported the muffler on jack stands while moving it around.
i barely jacked the SUV up, so i had to cut the tail pipe in two places.
i left it all loose, till it was all on.
i had to find my own washers to put on the muffler clamps.
here's all the pics:
http://s19.photobucket.com/albums/b170/04vrscb/Tahoe-JBA-Exhaust/
the muffler comes with a sheen on it. i made a slurry of metal polish and used a 400 grit to "wet sand" the grimy cover off it.
i used a drill wheel & some metal polish to cut off all the brown weld spots.
they looked like pooh, but i could not afford a big money polished exhaust.
and how many people are gonna see it, anyways?
it's kinda loud, but mostly mellow
got it here, use a discount code:
http://www.autoanything.com/exhausts-mufflers/77A2281A2347250.aspx?kc=ffsku
---------- Post added at 05:40 PM ---------- Previous post was at 05:32 PM ----------
videos:
i barely jacked the SUV up, so i had to cut the tail pipe in two places.
i left it all loose, till it was all on.
i had to find my own washers to put on the muffler clamps.
here's all the pics:
http://s19.photobucket.com/albums/b170/04vrscb/Tahoe-JBA-Exhaust/
the muffler comes with a sheen on it. i made a slurry of metal polish and used a 400 grit to "wet sand" the grimy cover off it.
i used a drill wheel & some metal polish to cut off all the brown weld spots.
they looked like pooh, but i could not afford a big money polished exhaust.
and how many people are gonna see it, anyways?
it's kinda loud, but mostly mellow
got it here, use a discount code:
http://www.autoanything.com/exhausts-mufflers/77A2281A2347250.aspx?kc=ffsku
---------- Post added at 05:40 PM ---------- Previous post was at 05:32 PM ----------
videos:
Last edited: