I found some slides but...

[bosworth496]

dont know how they will work for me...they are 6 lug +25mm offset 9.5 wide...id a 5mm that big of a deal guys?? i want to do a 3/5 will i have rub issues?

 

[soulsea]

If they are 22x9.5 with a +25 offset you will probably rub a little with such a big drop. How much will also depend on the size tires you go with ... but you'd have rubbed anyway with a factory spec +30 offset.

 

[shundal]

im running those slides with same offset on a 2/3 drop with 305/35/24 and the front had slide rub with inner fender which just required some heating/trimming

 

[bosworth496]

ya they are 24's how much trimming and cutting i found them for 900$ with tires

 

[shundal]

trimming was minimal. most of the problem was solved with a heat gun and pushing the liner back.

 

[bosworth496]

you are on a 2/3 right?? do you have any pics

 

[shundal]

yea i have a 2/3 right now. thttp://www.tahoeyukonforum.com/forum/album.php?albumid=1512heres some pics in my album.

I don't have any pics upclose of the fenders, but could get some on the weekend when i head back home. Haven't been driving the hoe around lately.

 

[bosworth496]

if ou could that would be rad so i can see what i might be geting my self in to...and your hoe is sick

 

[GalaxyBlackEsky]

I had 24" slides on before my 6's and it does rub on a 2/3 drop if you are running a 305 tire. I had to trim a lot of the rear fenders. I can up load pics of the triming. Front didn't have to much of a issue just a full lock.

Here is the triming of the rear these are with the 6's but didn't really have to trim anymore out when I added the 6's





And this is the pic of it with the 24's and it was basically a 3/3 drop because of front spring sag before I switched to spindles up front

 

[bosworth496]

blackdout what offset where you running on the 24's??