I want to smoke tires W/24'S

[Travieso]

Hey guys After a few days of reading the forums i would like to introduce myself, and not just linger around here, lol

Basically what i want to do is try to smoke some tires on my 24's is that possible ?

So What do i need to achieve this ?
Basically i want to get the best bang for my buck

this is what i currently have (not much but a good start i suppose)

Magnaflow Catback exhaust system
3.75 Gear ratio stock from the dealership

Things that i might buy in the future,

1.Cold Air Intake (can anyone recommend me some)?
I was thinking a AEM CAI - i heard threw the dealership that getting a wet CAI will damage your sensors etc.

2. Long tube headers (can anyone recommend me some)?

3. Chip was thinking of a Superchips Cortex™ Programmer

Will this help me out alot considerably ?

Thanks... Oh i found a new home

Here is a picture

 

[Rollin Thunder]

AEM brute force. Not sure on Headers. But SKIP THE CHIP. Just get a BB custom tune, AFTER all your bolt on mods. Biggest power increase before forced induction though would be a Cam.

 

[tast101]

Welcome to the forum. Do everything JK, Chistoso, and Jennabear have done. hahah Then you be running Ricers with the 24z. Soe engine work and a supacharger!!

 

[blueflamed03]

welcome Nice looking ride!

3.73's are nice, but 4.10's would help.
LPP headers, and a Black Bear tune.
AEM or choice of brand CAI.

 

[JKmotorsports]

I can roast my 24s along with a few performance cars
If you have the pcm retuned and remove the Torque Management, that will help a lot. Install longtube headers, intake, exhaust, higher stall converter and retune the pcm and you'll be able to smoke the tires a little easier. Cam and heads will make a huge difference and a power adder like n2o or a blower will definitely help you light the tires. And check your rpo codes to see what rearend gears you have. Deeper gears will definitely help.
BTW, welcome to the site

 

[wmgood64]

Thats a tall task!!

 

[brucebruce45]

4.10 gears and a tune. that's all u need

 

[Robert.K]

Do 4.1o gears go into a 4x4? if not ant suggestion?

 

[Rollin Thunder]

Just a word of warning here. Your stock tranny cant handle much more power than stock.

 

[JennaBear]

It actually can, you just have to dial the line pressures in right to make it have a longer life.