Interior light stays on

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

gmcukan

TYF Newbie
Joined
Jul 23, 2010
Posts
11
Reaction score
0
I have a 98 yukon and recently have a problem with my interior lights staying on. I have to push in the "dome override" button to turn them off. Ive found the problem i hope..Im missing the switch that is under the tailgate window hatch. I cant find it on line and it looks a little different than the door jamb switch. Any ideas?:emotions122:
 
OP
OP
G

gmcukan

TYF Newbie
Joined
Jul 23, 2010
Posts
11
Reaction score
0
Well I replaced the switch assembly in the rear tail gate hatch and i still have the problem. Only now i hear the clicking noise from under the dash as the light flickers on and off again. I gotta find the thread i read in the past about someone having the same issue.:893Chainsaw-Smilie-:893Chainsaw-Smilie-
 

busafreak

Member
Joined
Apr 8, 2011
Posts
73
Reaction score
0
I had that problem too recently. Ended up being the dome override switch spring wasnt doing its job. I took it appart and re set it in place. Be forewarned though, It was a biotch putting it back together when I accidently pushed off the main light switch and the springs and bearings came flying off..
 

Diller

Full Access Member
Joined
Sep 21, 2010
Posts
108
Reaction score
0
Location
Cedarburg, WI
Well I replaced the switch assembly in the rear tail gate hatch and i still have the problem. Only now i hear the clicking noise from under the dash as the light flickers on and off again. I gotta find the thread i read in the past about someone having the same issue.:893Chainsaw-Smilie-:893Chainsaw-Smilie-

I'm thinking back, since my truck does this also. My upper glass doesn't latch too tightly, or it works itself loose over time. I believe that the remedy I read was someone either using 2-sided tape or gluing something to the inside of the glass, right where the switch hits the glass.

Essentially what is happening is that the switch is "opening and closing" as you are hitting bumps in the road. This will turn the light on and off. It gets quite annoying!! :boxed:
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
187
Location
unknown at this time.
That clicking sound is the interior light module controlling the light output. Is there any other door that does not act correctly or have a switch that movement feels different then the other?
 

GangstaCowboy

Full Access Member
Joined
Sep 24, 2011
Posts
143
Reaction score
3
I had this problem. It ended up being bad light switches in the door jam. My driver side was not closing all the way. I bought all new switches on rock auto for like 2 dollars a piece.
 

Forum statistics

Threads
132,185
Posts
1,863,643
Members
96,697
Latest member
Dewd
Top