Hi all my name is Charlie and I own a 2005 GMC Yukon XL 1500. I just replaced the steering gearbox that w as leaking out or the pitman arm shaft seal. I got it back together now I think the lines from the power steering cooler are leaking. I have a length of transmission hose to replace the hoses but do I cut off the crimped end on the hose going to the gearbox?
Intro and problem
- Thread starter 1968fury
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
If you look at the picture of a replacement cooler on Rockauto there's just hoses with regular hose clamps where they connect to the pump so I would say yes. Please report back when you tear into it.
