Issue with Door Locks

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Mar 8, 2010
Posts
47
Reaction score
2
Location
Valdosta , GA
Ok I dont know if anyone has had this happen but I dont know where to start to fix this. So when I hit the lock or unlock button up front or on the keypad the front doors lock but the back doors and rear gate stay unlock. Then some days everything works fine. Then the next day its back to not working. I have checked the fuses and the relays and everything seems to be working. Any input any one has would be helpful. thanks
 

Rivieraracing

Full Access Member
Joined
May 2, 2009
Posts
3,810
Reaction score
82
Location
Oregon
Check the 2 harness plugs at the drivers window switch, make sure they have good contact because if they don't it can do what you describe!
 

Freedom Motorsports

Full Access Member
Joined
Jul 16, 2011
Posts
933
Reaction score
20
It also wouldn't hurt to put a little dielectric grease on the inside of them while you are at it.
 

GeneralNoobzor

Full Access Member
Joined
Jan 15, 2011
Posts
186
Reaction score
3
Location
Phoenix, AZ
Make sure every door plug for the control pannels in both the front doors, back doors and rear hatch is plugged in. If even one pin is not in it's slot your doors will not lock.
 

Kaotik

Full Access Member
Joined
Apr 17, 2011
Posts
171
Reaction score
0
i had a problem once where the child safety switch wasnt all the way to one side and my doors wouldnt lock but i think it was an isolated incident
 
OP
OP
tarheelsfan2000
Joined
Mar 8, 2010
Posts
47
Reaction score
2
Location
Valdosta , GA
Just wanted to thank everyone for the advice. Took it apart and cleaned up the connections and all. Everything is working fine right now knock on wood. Thanks :Handshake:
 

spooln1

TYF Newbie
Joined
Aug 2, 2011
Posts
2
Reaction score
0
I am having this problem only for unlocking the doors. they lock everytime but only unlock a third of the time. I havent been able to find a wiring diagram. Does the unlock circuit wiring also go through the same path. Even when using the remote?
 

gitrduun

Full Access Member
Joined
Apr 16, 2012
Posts
195
Reaction score
0
Check the 2 harness plugs at the drivers window switch, make sure they have good contact because if they don't it can do what you describe!
this is just that black manual switch assembly on the door?
 

Forum statistics

Threads
133,455
Posts
1,885,785
Members
98,609
Latest member
stormtrooper777
Top