July 4th Modifications??

[sparg93]

So what did everyone work on during the extended weekend???

Myself:
Finished installing Mark VIII e-fan
55w HIDs
Discs/Rotors + flush on '89 Mustang

 

[retorq]

Bad weekend for my truck, it vapor locked (yes FI can vapor lock) on the highway, 0 fuel pressure, just dripping from the TBI. I thought for sure the pump was no good or I was super low on gas even though my guage was reading 1/2 tank. I pulled the gas cap and got a HUGE vacuum release ... my evap purge stuff may not be working. So I got it towed home, $200. Started right up the next AM. Put a new vented cap on it to possibly prevent this in the future.

 

[BluHoe96]

No mods, but definitely ordered new parts. Autopartswarehouse had a 20% off sale for the 4th of July. Ordered EBC slotted rotors and hawk HPS pads!

 

[gpracer1]

Got home at midnight from friends, home AC not working.....90 F and 60% humidity. Turns out the condesor fan wire was pinched and the rain finished the short. Quick butt connector and it was back......after I almost tripped on a roof vent pipe that left a gash on my leg.

After that I was quite awake, so I yanked out the OEM cassette deck and installed a DVD Nav 7" flip out screen deck till 2 am (the only time you can work on things here without melting).

Today got the stock truck dynoed 193 hp and 252 tq to the wheels.
Just came back from the muffler shop and had an O2 bung welded on.....now if it wasnt 108F out, I would log a few runs with the wideband.

 

[gbleezy]

I put in some G4 tails last Thursday cuz I wanted them on for the weekend.

 

[TigerEyz3]

No mods, but definitely ordered new parts. Autopartswarehouse had a 20% off sale for the 4th of July. Ordered EBC slotted rotors and hawk HPS pads!

Wish I had known that... I need to do some brake work.