Just discovered Im missing a part of my IFS, Help Id'ing the part

[owl_93]

Just taking a look under the front end a moment ago and noticed im missing a rod that connects my lower a-arm and a bar that connects to the other side. I don't know a ton about IFS. Can someone ID the missing part please?

Here is the intact side:

Here is the side with the rod missing:

 

[Zak Attack]

Swaybar Endlink.

 

[owl_93]

Swaybar Endlink.

Thanks

Sent from my Galaxy Note 4 via Tapatalk for Android

 

[yates ™]

May want to find longer adjustable ones, with your front end stretched as far as it is they will more than likely continue to break.

 

[owl_93]

May want to find longer adjustable ones, with your front end stretched as far as it is they will more than likely continue to break.

Thanks. Any suggestions on brand?

Sent from my Galaxy Note 4 via Tapatalk for Android

 

[yates ™]

Thanks. Any suggestions on brand?

Sent from my Galaxy Note 4 via Tapatalk for Android

Sadly I don't know of any but I also have never looked for them I know they make them for lowered vehicles and sure they also do for lifted applications. The other choice would be make a small spacer to move the sway bar down a bit.

 

[owl_93]

Sadly I don't know of any but I also have never looked for them I know they make them for lowered vehicles and sure they also do for lifted applications. The other choice would be make a small spacer to move the sway bar down a bit.

Am I damaging anything by driving without 1?

Sent from my Galaxy Note 4 via Tapatalk for Android

 

[ezdaar]

no, damage, just will corner like pooooo


since you off road and are now busting endlinks, look to the quick disconnect type.
Disconnecting sway bar really helps offroading.

 

[Coatwolf]

Energy Suspension makes nice bushings kits and sway bar end links. I just did mine super easy job.

I replaced most all my bushings recently with Energy Suspension Brand



I used this kit - just use some silicone on the bushings and good to go

http://www.amazon.com/gp/product/B001EEQUFU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

 

[Coatwolf]

I posted on your other post about that problem - its prob the right size, try jacking up your lower control arm and threading the bolt up top.... I just did these. - Ill post up a video here in a sec

https://www.youtube.com/watch?v=B515N144WOQ

or

https://www.youtube.com/watch?v=nyapHaiXILI