Level with 285/70/17's

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
Kuhndog-11

Kuhndog-11

Member
Joined
Apr 26, 2021
Posts
44
Reaction score
36
@Kuhndog-11 can you post up-close pics of the trim job? I am contemplating the same lift/level and would like a visual. Especially of how much of the bumper support you trimmed. Awesome project and write-up. Also saw your rig on CustomOffsets. :cool:
Both sides are the same trimming just opposite. You can see where I took the screw from the original location on the support and moved it over the secure the inner liner. It's hard to get a picture but I have about 1/4 inch if not a tad more clearance at full lock and throughout the whole rotation of the tire. the back isn't an issue at all.
 

Attachments

  • 20210906_173424.jpg
    20210906_173424.jpg
    187.2 KB · Views: 40
  • 20210906_173509.jpg
    20210906_173509.jpg
    172.2 KB · Views: 41

Prometheus_Lens

TYF Newbie
Joined
May 11, 2018
Posts
25
Reaction score
7
@Kuhndog-11 Thank you for the trimming pics. Do you have any issues regarding your upper control arms? How are the ball joint angles after the 2.5 inches? Do you think they might pop out?

Also, a general question, has anyone did a similar lift/level and completely left out the lower bumper supports?
 
OP
OP
Kuhndog-11

Kuhndog-11

Member
Joined
Apr 26, 2021
Posts
44
Reaction score
36
@Kuhndog-11 Thank you for the trimming pics. Do you have any issues regarding your upper control arms? How are the ball joint angles after the 2.5 inches? Do you think they might pop out?

Also, a general question, has anyone did a similar lift/level and completely left out the lower bumper supports?
Everything looks good man. I have zero concerns about ball joints and everything moves without binding. Ride is real close to stock. Very smooth still.
 

Tozan

Overlander
Joined
Nov 12, 2016
Posts
609
Reaction score
901
Location
Yavapai Arizona
@Kuhndog-11 Thank you for the trimming pics. Do you have any issues regarding your upper control arms? How are the ball joint angles after the 2.5 inches? Do you think they might pop out?

Also, a general question, has anyone did a similar lift/level and completely left out the lower bumper supports?
Mine doesn't have any bump stops I get about 10 inches of travel with it. I am running 35's on it.213327.jpg

Black rock Tahoe.jpg
 

Forum statistics

Threads
132,089
Posts
1,862,182
Members
96,557
Latest member
Harald1959

Latest posts

Top