Leveled with bad tie rod angles

[Mrobinson]

Looking to correct tie rod angles is pitman/idler arm drop a option please help

 

[imi4tth3w]

not an option. you'll need a proper lift with aftermarket steering knuckle and lower control arm relocation brackets. most of these lifts are at least 4" of lift.

other solution is to de-crank your torsion bars and reduce the amount of lift you have in the front.

 

[Mrobinson]

not an option. you'll need a proper lift with aftermarket steering knuckle and lower control arm relocation brackets. most of these lifts are at least 4" of lift.

other solution is to de-crank your torsion bars and reduce the amount of lift you have in the front.

Problem corrected the opposite of what the lowered fix is,eliminated my bump steer

 

[Fjs0001]

Where did you pick those up at?

 

[Bill 1960]

Spacers under the tie rod ends?

Not in my garage. Steering linkage is already a weak point in the GM design.

 

[Mrobinson]

Where did you pick those up at?

I made them along with a cognito pitman arm brace kit made my tahoe drive alot better