Leveling kit, tires, wheels, grill installed- 2015 Yukon

[tomsquad418]

Finally got everything installed, must say I am very pleased how it turned out. Here are the specs:

2.5" SuspensionMaxx leveling kit
285/60/20 Goodyear Duratracs
Chrome snowflake wheels

(stock pic to current pic)

View attachment 69879

View attachment 69880

View attachment 69881

Do you have a better side shot and picture of the back? How do you like the tires? Do they look too skinny or is it enough width? Thanks

 

[Adam10532]

I would love to do this to my 2016 Yukon Denali XL but I would also like to do a one-and-a-half lift in the back but from what I've seen I can't find a company that can compensate for the added length needed for the arms that activate the autoride system

supermaxx will sell you just the relocation bracket needed for autoride and magnetic ride ask for john he will help you out

 

[Denton]

Do you have a better side shot and picture of the back? How do you like the tires? Do they look too skinny or is it enough width? Thanks

Sure, what angle do you want exactly and I'll get it today. Love the tires, best set I've owned yet. Not too skinny at all, look meaty.

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[tomsquad418]

Sure, what angle do you want exactly and I'll get it today. Love the tires, best set I've owned yet. Not too skinny at all, look meaty.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Can you please take a few pictures from the side, then one of the rear and one head on? Plan on doing this same setup on my Tahoe with open countries ats in this size. Wish Nitto made this size..

 

[tomsquad418]

Sure, what angle do you want exactly and I'll get it today. Love the tires, best set I've owned yet. Not too skinny at all, look meaty.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Any update on the pics??

 

[JennaBear]

2016 Denali with SuspensionMaxx leveling kit 1.5" and 33x12.5" Nitto Ridge Grapplers.

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

[Redbeard1]

2016 Denali with SuspensionMaxx leveling kit 1.5" and 33x12.5" Nitto Ridge Grapplers.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Jennabear the denali looks badass, I would like to know if you are running 33 x 12.5 or 305 55 20, and also are you having rubbing issues or how much trimming was involved. I was under the impression that quit a bit of trimming is in order to run 33's without 4 inches of lift.

 

[JennaBear]

Jennabear the denali looks badass, I would like to know if you are running 33 x 12.5 or 305 55 20, and also are you having rubbing issues or how much trimming was involved. I was under the impression that quit a bit of trimming is in order to run 33's without 4 inches of lift.

They are 33x12.5x22 which is actually a but wider than 305s. With the 1.5" lift, I do not have any rubbing.

Sent from my SM-G950U1 using Tapatalk

 

[Vor3001]

They are 33x12.5x22 which is actually a but wider than 305s. With the 1.5" lift, I do not have any rubbing.

Sent from my SM-G950U1 using Tapatalk

JennaBear - Great ride.. Was wondering since your lift is only 1.5".. in your opinion, if you did NOT do any lift and left it stock would it rub?

assuming you did not trimming in your set up?

tks!

 

[JennaBear]

I do believe it would have rubbing issues without a lift on there. You are correct, I did not have to do any trimming on mine.