Lift and Tire specs

[bowtiefreak]

6+3

 

[mudslinger96]

6+3

I agree. The hitch sits down to much to be a 2"bl

 

[SPLmonster13]

Yes! I hope mine turns out half this good!!

 

[TAHOETIM]

Agree hitch is a give away for the bl

 

[SCHUBS]

I was using the space between the hitch and the bumper to gauge some kind of BL
Shit I hope my turns out like this.

I am confused at this comment, a body lift would not change the hitch to bumper clearance because both the bumper and the hitch are mounted to the frame. That is why you get that ugly gap between the bumper and the tailgate. And the molding on the bumper matches the body perfectly... Doesnt make since i would have to guess no body lift

 

[SPLmonster13]

When you body lift you are using body blocks, literally lifting the body from the frame. Since the hitch is mounted to the frame and the body is being lifted from the frame, this creates the gap. If you relocate your bumper up to match the 3" of body lift, then the hitch would hang 3" below the bottom of the bumper.

 

[SCHUBS]

When you body lift you are using body blocks, literally lifting the body from the frame. Since the hitch is mounted to the frame and the body is being lifted from the frame, this creates the gap. If you relocate your bumper up to match the 3" of body lift, then the hitch would hang 3" below the bottom of the bumper.

Ah End of confusion, thanks. I did not know that they made a bumper relocatin bracket

 

[SPLmonster13]

Ah End of confusion, thanks. I did not know that they made a bumper relocatin bracket

That's what the forum is for!

It's funny you should say that, because I didn't know they made a bumper relocation bracket either....so I cut the inside of my bumper and spot welded it up 3"....ha
Oops

 

[sparg93]

Does that truck belong to Vigh from GMC4x4?

 

[SPLmonster13]

I have no idea?! Not a member there. Does it look to be?