Lift and wheels ?'s

[Family Truckster]

I have been doing a lot of research on here but cant find a definite answer to my questions. I know that 305/55r20's will fit with the CCM leveling kit. But I cant find info on the ideal wheel specs to minimize cutting and trimming.

The wheels I'm looking at are the, BMF Novakanes 20x9 5" backspace 0 offset and Method Race Wheels "The Standard" 20x9 5 3/4" backspace +18 offset.

I guess my question is, what wheels specs are ideal and will one of these wheels work with minimal trimming? I would like the wheel to stick out a little.

Thanks in advance and great forum.

 

[felixgun]

305/55/20's will definitely rub with the CCM leveling kit.

 

[domin8]

305/50/20 only rubs at full lock, and it's not very much. I have them and they do stick out a little up front and look flush with the body in back. I'm still using the stock wheels.

 

[07warwagon]

@family truckster....where are u located

 

[Family Truckster]

I'm located in San Jose CA. So I got a crazy deal on a full set of fox shocks. The specs say you can get 3" of lift out of the front coil overs. So my game plan is the fox shocks, BMF 20x9 Novakanes, and a 305/50/20 MT of some kind. My next dilemma is what gears to run. My Tahoe came with 3:08's and is a turd with stock wheels.

 

[07warwagon]

I have a 4" Rancho lift kit on my current 2007, and am looking to sell my lift kit since I'm selling my ride

 

[White07Tahoe]

I had 305/55/20 terra graplers and I didn't do any trimming. It rubbed on full lock but that was all, not a big deal.

 

[InTruckDesign]

305/55/20's will rub on anything but stock spec. wheels.

 

[Family Truckster]

@07warwagon is the kit complete and how much do you want for it?

I know stock is ideal for 305's and a leveling kit but will the BMF's work with minor trimming? I don't mind some minor trimming like inner fender plastic or spoilers. I just don't want to get into major body trimming. I'm afraid to make it look hacked up.

 

[InTruckDesign]

I can tell you that 20x9 w/ 18 offset..you will be trimming some metal.