LIft gate problem - 2019 Tahoe

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

2591tdj

Full Access Member
Joined
Jan 26, 2010
Posts
245
Reaction score
152
Location
Miss
The power lift gate is not working correctly on my 2019 Tahoe. Irregardless whether I try to open it with the remote, with the button on the handle or buy kicking beneath the hitch, it opens about a foot then stops. I have to manually lift it the rest of the way. Closing is similar, except that I have to close it manually as none of the above listed releases work nor does the closing button on the bottom of the door.

Any idea what might be the problem...or the fix? The Tahoe has been sitting unused for the last few weeks while we shelter at home. It just did this today when I tried opening it. It’s still under warranty and I will take it to the dealer next week if I can’t find a fix.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,118
Reaction score
39,067
Location
Stockton, Ca.
Not sure how the gates work on the k2's but sometimes it's the gas cylinder, but it could also be a calibration is needed if it is more motorized and less dependent on the gas cylinder, either way it should be under warranty I would think anyway
 

Tahoe14

Full Access Member
Joined
Jun 10, 2014
Posts
1,976
Reaction score
1,226
Location
Central Fl
Its been reported on here before. More than likely the actuator(gas shock). At one time there was a TSB. Do a google search and you should find it plus the part and how to repair. As stated it should be covered under warranty. Good luck.
 

CXXX

TYF Newbie
Joined
Jul 24, 2018
Posts
16
Reaction score
11
Location
Thompsons Station, Tennessee
You can program the lift gate to limit the opening to any height. Manually open it to the desired height and hold the CLOSING button until the horn honks or the tail lights flash. Maybe your button got pushed at the height it is currently opening to?
 

PG01

Supporting Member
Joined
Nov 6, 2016
Posts
14,851
Reaction score
18,181
Location
Up here to the right
You can program the lift gate to limit the opening to any height. Manually open it to the desired height and hold the CLOSING button until the horn honks or the tail lights flash. Maybe your button got pushed at the height it is currently opening to?
This is a possibility and i can see that happening but as someone said above there was a posting recently about the liftgate not opening....something about the motor or strut...
 
OP
OP
2

2591tdj

Full Access Member
Joined
Jan 26, 2010
Posts
245
Reaction score
152
Location
Miss
The local Chevy dealer replaced the actuator for the lift gate today. It’s now working. He said that he’s had to replace 20-25 of them in the last 12 months. It’s surprising to me that this one failed in the first year.
 

Forum statistics

Threads
132,200
Posts
1,863,818
Members
96,716
Latest member
kendrick newborn

Latest posts

Top