Liftgate height - how tall should it be

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Midwest

TYF Newbie
Joined
Jun 23, 2023
Posts
4
Reaction score
1
I'm trying to figure out if my liftgate sits too low. 2017 yukon XL. I am 5'9" and hit my head on the sides and just barely clear the center. This seems super low. It seems to operate normally; quiet, smooth etc. When its open fully, I cannot push it up any higher.

Can anyone get me a measurement from the ground to the locking mechanism or to some reference point on the door?
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,220
Reaction score
51,382
Location
Oregon
Depends on if you’re lowered or stock height. Also you could disconnect the shocks and see if it goes higher but be careful and don’t drop it on your head or you’ll be mad at me. :( It’s possible someone replaced them with some that are too short and aren’t allowing full opening because they’’re at the end of their length.
 
Top