Light Bar and Ranch Hand

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Big G

TYF Newbie
Joined
Dec 18, 2014
Posts
1
Reaction score
0
Location
Austin, TX
I have a 2010 LT 4x4 with the legend ranch hand grille guard. I was wondering if anyone has the same setup with a light bar attached to it. I'm looking to also find out how you got it mounted to the grille guard.
 

Cshayes2

Full Access Member
Joined
Dec 18, 2013
Posts
113
Reaction score
14
Location
Tuscaloosa, Alabama
I do not have the ranch hand, however i have a TrailFX brush guard with a 30 inch light bar mounted to it. They'd just drill two holes into your cross bar and bolt the mounting bracket through the crossbar and put a lock nut on the bottom of the crossbar. Idk how much room there is on the ranch hand, but there is about a inch on each side of my light bar. If you want any other picture angles or have questions lemme know.
2jcirtl.jpg
 

njracer

Full Access Member
Joined
Nov 21, 2011
Posts
179
Reaction score
34
I do not have the ranch hand, however i have a TrailFX brush guard with a 30 inch light bar mounted to it. They'd just drill two holes into your cross bar and bolt the mounting bracket through the crossbar and put a lock nut on the bottom of the crossbar. Idk how much room there is on the ranch hand, but there is about a inch on each side of my light bar. If you want any other picture angles or have questions lemme know.
2jcirtl.jpg

What brand of light bar and how is the output?
 

Cshayes2

Full Access Member
Joined
Dec 18, 2013
Posts
113
Reaction score
14
Location
Tuscaloosa, Alabama
What brand of light bar and how is the output?

the light bar is an Aurora, and if you click on my build thread i have an output picture. it doesn't do it justice but everything from id say 10-2 o clock is lit up and id say it goes about a 100 or more feet. real happy with it, so far i have no real practical uses for it other than to fill the gap in my brushgaurd and to get those annoying people back that don't quiet understand my brights aren't on its the angle my truck sits at:jester:
 

yates ™

Resident Apple hater
Supporting Member
Joined
Jul 9, 2010
Posts
24,409
Reaction score
6,421
Location
Iowa
the light bar is an Aurora, and if you click on my build thread i have an output picture. it doesn't do it justice but everything from id say 10-2 o clock is lit up and id say it goes about a 100 or more feet. real happy with it, so far i have no real practical uses for it other than to fill the gap in my brushgaurd and to get those annoying people back that don't quiet understand my brights aren't on its the angle my truck sits at:jester:

Please do not ever shine that light at on coming traffic. This is a very unsafe practice.
 

Forum statistics

Threads
132,427
Posts
1,868,005
Members
97,109
Latest member
haloOne

Latest posts

Top