Lighting question.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

97srad750

Full Access Member
Joined
Jan 3, 2010
Posts
75
Reaction score
1
Location
Lexingon, SC
I don't have rear brake lights, or turn signals. I took out the tail lights and noticed the previous owner had taken out the reverse bulbs. I put a bulb in and they stayed on despite not being in reverse. Still no brake or turn signals. The third brake light is the only one that works. The contacts on the drivers side looks charred, so I ordered a circuit board for both sides just in case. If one circuit board is faulty would that make the other be out? Would a bad circuit board cause the reverse lights to stay on? Does it sound like I'm on the right path? Thanks
 

noJeepshere

Full Access Member
Joined
Nov 26, 2010
Posts
1,015
Reaction score
86
Location
Bountyfull, Utahrd
Along with the circuit boards, look for the ground wires going from the tail lights, one might not be on tight or broken.
 

Donnie Yukonie

Yates Caretaker
Supporting Member
Joined
Jul 31, 2011
Posts
5,125
Reaction score
161
maybe the reverse lamp switch in the tranny is gone?
 
OP
OP
9

97srad750

Full Access Member
Joined
Jan 3, 2010
Posts
75
Reaction score
1
Location
Lexingon, SC
I ended up replacing the circuit boards and thought they were working. They aren't. When the headlights are on the drivers side brake light, third brake light come one when the brakes are hit. The passenger brake light goes out. All of them seem to work when the headlight switch is off. The passenger reverse light also stays lit when the headlight switch is on. Could it be the brake light switch at the pedal, or with all this going on is it probably something else?
 

Tricky

Full Access Member
Joined
Nov 27, 2011
Posts
495
Reaction score
2
Location
Illinois
I read somwhere about a multi function switch in the steering colum that controls all the above lights. If I find thread I will post for you of maybe someone else already knows.
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
187
Location
unknown at this time.
I read somwhere about a multi function switch in the steering colum that controls all the above lights. If I find thread I will post for you of maybe someone else already knows.

controls output of parking and tail light functions but not reverse light or high mount unit.
 

retorq

Full Access Member
Joined
Mar 4, 2010
Posts
3,018
Reaction score
10
Location
Kingman AZ
There is a trailer harness that has a lot of excess wire.

What most likely happened was some toothless hillbilly got er done real quick one nite before trucking his trailer full of moonshine across the state line ... trace it and fix or pull it completely and see if it helps. Someone put one in my truck before I got it and it was hacked up something fierce.
 

Forum statistics

Threads
132,087
Posts
1,862,132
Members
96,554
Latest member
eod_tech

Latest posts

Top