lockpick with backup camera, can you get factory harness plug pins?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

02Lightning

Full Access Member
Joined
Jun 8, 2009
Posts
484
Reaction score
102
In order to install the backup camera feature on the lock pick it requires you to cut a wire under the pasenger seat. Well I don't want to do that, so what I would like to do is purchase a pin the goes inside the factory plug and get a pick and pull out the existing one. Then replace with my own wire. Does anyone know where to purchase the internal pins that goes into factory plugs?
 

Fast55

Full Access Member
Joined
Sep 8, 2009
Posts
365
Reaction score
3
Location
Ventura County USA
Hell, I'd be happy to find the damned plug. there is no plug in my '09 LTZ in the location descibed so for now at least, I don't have that feature.
 
OP
OP
02Lightning

02Lightning

Full Access Member
Joined
Jun 8, 2009
Posts
484
Reaction score
102
Hell, I'd be happy to find the damned plug. there is no plug in my '09 LTZ in the location descibed so for now at least, I don't have that feature.

I haven't tried to look for it yet, I just assumed it was there. I installed the lockpick last night.
 

RBHoe

TYF Newbie
Joined
Sep 18, 2009
Posts
9
Reaction score
0
Same here- the camera control module isn't under the seat in my 09 LTZ. Anybody know where it is?
 

ajs800

Full Access Member
Joined
Jun 24, 2009
Posts
706
Reaction score
198
Location
Michigan
In order to install the backup camera feature on the lock pick it requires you to cut a wire under the pasenger seat. Well I don't want to do that, so what I would like to do is purchase a pin the goes inside the factory plug and get a pick and pull out the existing one. Then replace with my own wire. Does anyone know where to purchase the internal pins that goes into factory plugs?


I'm assuming you already have the oem camera factory installed or are you looking to install a camera and run it through the lockpick? If you're looking to install a new camera, there's no need to splice any wires, the lockpick has all the necessary built-in connections.


nevermind...i see that you have a denali, so you already have the cam and are probably tring to tap into it.
 
OP
OP
02Lightning

02Lightning

Full Access Member
Joined
Jun 8, 2009
Posts
484
Reaction score
102
what is lockpick? I know thats a noob question but I see that word floating around here a lot

It's a device that lets you watch DVD's while in drive up front, program your GPS and turn the rearview camera on while driving.

---------- Post added at 08:40 PM ---------- Previous post was at 08:39 PM ----------

Which circuit are you trying to tap into?

There is supose to be one under the pasenger seat, instead of cutting the wire I would like to just purchase a pin and pull the factory one out.
 

91RS

Full Access Member
Joined
Nov 15, 2009
Posts
2,587
Reaction score
2,033
Location
GA
The dealer is probably going to be the best place to get terminals, especially for a vehicle that new. If you knew what brand/style/name/whatever the terminal is you could probably source some online, but any dealer should have those.
 

Forum statistics

Threads
132,042
Posts
1,861,454
Members
96,492
Latest member
Chevy_Boy1990
Top