Looking for short 3" exhaust turndown tip

[Charlie207]

I'm looking for something like this style, but more like 4-6" in length. For reference, this picture shows a turndown 12" in length.

Otherwise I'm going to buy this and modify it to be shorter. I'd rather take the pre-made/lazy route if possible.

The goal is to have the tip of the exhaust tucked under the bumper, like stock, while redirecting the exhaust flow down.

 

[Blackcar]

A company called Pypes makes a lot of different types of tips if you're wanting the screw type clamp on top of tip in picture, I haven't seen myself here is couple of links to down turns.

Schoenfeld Headers 3025 Schoenfeld Exhaust Turn-Downs | Summit Racing

Free Shipping - Schoenfeld Exhaust Turn-Downs with qualifying orders of $109. Shop Exhaust Tips at Summit Racing.

www.summitracing.com

Pypes® PVD13 - 409 SS Downturn Extension Pipe (3" Diameter)

409 SS Downturn Extension Pipe - Part Number PVD13 by Pypes. Main Piping Diameter: 3". Available in Racing Parts Department at www.carid.com

www.carid.com

Now pypes has web site and their products are high but most are stainless steel and from things I have dealt with are very good.

Pypes® PVD13 - 409 SS Downturn Extension Pipe (3" Diameter)

409 SS Downturn Extension Pipe - Part Number PVD13 by Pypes. Main Piping Diameter: 3". Available in Racing Parts Department at www.carid.com

www.carid.com

 

[iamdub]

You can buy a piece of exhaust tubing from anywhere and cut it. O'Reilly, Autozone, etc. all sell 90s and 45s (bonus- you'll have two turn-downs for the price of one!) Pretty sure I've seen just turn-down tips, too. I know they're on Amazon.

 

[Charlie207]

You can buy a piece of exhaust tubing from anywhere and cut it. O'Reilly, Autozone, etc. all sell 90s and 45s (bonus- you'll have two turn-downs for the price of one!) Pretty sure I've seen just turn-down tips, too. I know they're on Amazon.

I went to the big three (AutoZone, O'Reilly's, and Advance Auto) plus a Runnings, and no one had what I was looking for.

 

[Blackcar]

Are you looking for 3'' dia or long.

 

[Charlie207]

3" diameter, but short length. I don't want it sticking out far past where it would overlap the existing exhaust. I just want a short turndown to direct noise/gasses down.

I imagine I can buy the Amazon part I have in the 1st post, and cut it shorter, and notch a few cuts in it to allow for a clamp. I was just hoping there was a cheap pre-built solution I could throw money at.

While enjoying my afternoon beverage I saw this, which would also redirect juuuust enough for my needs.

4-1/2" Muffler Turn Down - Keyser Manufacturing

keysermanufacturing.com

 

[iamdub]

Geeez. I just looked up "3 inch turn down exhaust tip" on Amazon. They're all in the $30 range and up!

Looked up "3 90 degree exhaust elbow" and found: https://www.amazon.com/Inch-Exhaust...QuMDkifQ==&sprefix=3"+90,aps,109&sr=8-11&th=1

 

[Charlie207]

Geeez. I just looked up "3 inch turn down exhaust tip" on Amazon. They're all in the $30 range and up!

Looked up "3 90 degree exhaust elbow" and found: https://www.amazon.com/Inch-Exhaust-Pipe-Mandrel-Elbow/dp/B093Y1DW48/ref=sr_1_11?crid=N0DA2DPG4CYR&keywords=3+90+degree+exhaust+elbow&qid=1666561339&qu=eyJxc2MiOiI1LjIzIiwicXNhIjoiNC42NiIsInFzcCI6IjQuMDkifQ==&sprefix=3"+90,aps,109&sr=8-11&th=1

And like that....

I spent money.

 

[992dr]

I can look around and see what I have floating around. May be able to whip something up for yah.

I actually have what iamdub send yah but, can't beat amazons prices hahaha

 

[Charlie207]

I can look around and see what I have floating around. May be able to whip something up for yah.

I actually have what iamdub send yah but, can't beat amazons prices hahaha

No worries, dude. I'll fabricobble something up.