Lowered My Denali (Pics Inside)

[Rollin Thunder]

Simple as that.. Talk to Tim, he's a supporting vendor here and he'll take care of you..
Let's stop all the thread hijacking already. It's getting annoying..

which your doing right now. Your hijacking the thread by talking to him and telling him to go to a vendor. The origional topic is about how this one person (blizzardx) lowered his truck. Not about where denali anyone should go for his stupid lowering shit.

 

[road1will]

DJM 3/5 drop
Mcgauhys 3/5 drop

For my AWD truck with 22s....where do I find either of these kits? I cant find them on their sites...

lol..its raking so bad right now...I think it looks funny though hahah

Actually RT, this thread is not how he lowered his truck. Its about him adjusting his torsion bars to see how low he could get it. He then went on to specifically ask where he could get a lowering kit.

 

[Rollin Thunder]

ima go mess with my torson bars, only im fixin to adjust them the other way.

 

[BlizzardX23]

check this out...I believe these trucks look good LIFTED and LOWERED...but like mentioned before...I believe by Boost/Max...It cost a lot more to lift these trucks PROPERLY then it does to lower them PROPERLY...

I throw my truck around corners as if it were BMW Z3....Im not only about going straight fast....I like how the truck handles...if I do what I like to it..(12-15 inch lift on 39s) I will not be able to drive like I do now...If Im going to spend $10,000-$12,000...it wouldnt be on modifying a vehicle that has no value...I'd put it in the bank or down on a house...or spend $5,000 on a supercharger! Im a lot more open minded then "you should only lift trucks/SUVs" I've had lifted trucks...pics are in my photo album...I like both worlds

yes, topic is about HOW to achieve lowest drop..thank you for everyone who is helping!

 

[BlackDenali]

I agree, I want to know how to get the lowest rear drop without spending too much dough!! I have a ground force 2/3 kit on 24's and I am not happy with it, so I would definately go with a 3/5 kit!! my .02!!

 

[OKLAGMCRUISER]

I agree, I want to know how to get the lowest rear drop without spending too much dough!! I have a ground force 2/3 kit on 24's and I am not happy with it, so I would definately go with a 3/5 kit!! my .02!!

from what I have gathered if you don't have shock extenders that may help bring the rear down a bit more, but to go 5" you'll need a 5" drop coil, shock relocators and to cut the bumpstop bracket. if you have autoride which I'm sure you do since you have a denali, you'll need the parts to trick the autoride into your new level.

 

[BlackDenali]

from what I have gathered if you don't have shock extenders that may help bring the rear down a bit more, but to go 5" you'll need a 5" drop coil, shock relocators and to cut the bumpstop bracket. if you have autoride which I'm sure you do since you have a denali, you'll need the parts to trick the autoride into your new level.

I want my truck to sit like jk's or close to it! (I know he has a 1" body drop)
Where would be the best place to buy the parts that you listed??

 

[blueflamed03]

I bet Tim can get you the shock relocators and springs, if you need the pins to trick your autoride, i have some that came in my Eibach kit you can have.

 

[BlackDenali]

I bet Tim can get you the shock relocators and springs, if you need the pins to trick your autoride, i have some that came in my Eibach kit you can have.

I have the pins to trick the autoride but thank you anyway blueflamed!!! Excuse the ignorance but who's tim and how do I get in contact with him to get a price on the springs and shock relocators??

 

[blueflamed03]

I have the pins to trick the autoride but thank you anyway blueflamed!!! Excuse the ignorance but who's tim and how do I get in contact with him to get a price on the springs and shock relocators??

has his own section 55belairtim



http://www.tahoeyukonforum.com/forum/forumdisplay.php?f=49