tybardy
everyone needs a Hoe
My truck was pushing a few MAF codes... I am not overly educated on what goes wrong with a MAF and if it is fixable. should I just go ahead and buy a new one?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
If you hadn't touched the MAF when the codes came up, I'd go to a parts store and pick up a can of MAF spray and clean out the MAF real well!! Just spray the stuff all over the inside of it, being very careful to not touch any of the wires, and let it all air dry (don't use compressed air, it will dry on its own!). Also, be sure to disconnect the electrical plug for the maf while doing this! Do that and see if you maf errors disappear before going out and buying a new one!
Not a stupid question. Mass Air Flow sensor.
---------- Post added at 09:02 AM ---------- Previous post was at 09:02 AM ----------
I second this motion.
THANKS Chauncey.
No problemo J Dubya.